Serving Mill Creek, Washington and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Commercial Washer Repair in Mill Creek, WA

A local list of companies near Mill Creek that work on commercial laundry equipment, with distances and public ratings.

Need commercial washer repair near Mill Creek?
Call our helpline to be connected with a technician who works on commercial washers.
☎(866) 293-4411
✓10 companies listed for Mill Creek✓Independent, not a manufacturer✓Public ratings & distances

Commercial washers run many more cycles than a home machine and add coin or card systems, heavier drives and, on larger machines, bolted-down frames that home models do not have. Companies that mention commercial laundry work come first, then other appliance repair companies near Mill Creek, with distances.

Laundromat & Coin-Op Washer Technicians, Mill Creek WA

40 repair companies serve Mill Creek from within 30 miles. 2 list an address in Mill Creek, and other nearby bases include Everett (12), Bothell (7), and Lynnwood (7). Be Tech Appliance Repair is the nearest, roughly 1.5 miles from Mill Creek. None of the companies within 30 miles mention commercial, laundromat or coin-op laundry work by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The 30 rated companies in range average 4.8 stars.

Commercial Laundry Work
Mr. Fridge | Commercial Refrigeration Repair
704 19th Ave E Ste 200, Seattle, WA 98112
17.1 mi from Mill Creek
★★★★★ 4.8 (558 reviews)
Saturday hours
Commercial Laundry Work
Bellevue Commercial Refrigeration Repair
500 108th Ave NE #1, Bellevue, WA 98004
17.1 mi from Mill Creek
★★★★½ 4.7 (150 reviews)
Saturday hours
Washer & Dryer Repair
Ace Appliance Service
13022 Ash Way Unit B, Everett, WA 98204
2.5 mi from Mill Creek
★★★★★ 5.0 (322 reviews)
Mentions washers
Washer & Dryer Repair
HotWire Furnace, Air Conditioning & Appliance Repair Bothell
1232 220th Pl SW, Bothell, WA 98021
5.0 mi from Mill Creek
★★★★★ 4.9 (1,493 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
18600 Alderwood Mall Pkwy, Lynnwood, WA 98037
3.8 mi from Mill Creek
★★★★½ 4.7 (413 reviews)
Mentions washers
Washer & Dryer Repair
Orca Appliance Services
16611 48th Ave W Unit A2, Edmonds, WA 98026
4.4 mi from Mill Creek
★★★★★ 4.8 (146 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
GR Solution Appliance Repair
12720 NE 180th St Apt I201, Bothell, WA 98011
7.4 mi from Mill Creek
★★★★★ 4.9 (53 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Fast Appliances Repair
5700 154th Pl SW, Edmonds, WA 98026
5.0 mi from Mill Creek
★★★★★ 4.9 (116 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
HotWire Furnace, Air Conditioning & Appliance Repair Everett
5133 134th St SE, Everett, WA 98208
2.1 mi from Mill Creek
★★★★★ 4.9 (54 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Fixers
18114 19th Dr SE, Bothell, WA 98012
2.0 mi from Mill Creek
★★★★★ 4.9 (270 reviews)
Mentions washersSaturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Repair market snapshot: Mill Creek, WA
Rated 4.5 stars or higher (10+ reviews)26
Mention commercial or laundromat work0
Open on Saturdays (per listing)44
Three nearest companies, miles away1.5, 1.7, 1.7
Name washers or washing machines in their listing13
Repair companies inside 30 miles60

Closest matches for Mill Creek: Mr. Fridge | Commercial Refrigeration Repair (17.1 miles away, based in Seattle, 4.8 stars from 558 reviews, lists Saturday hours); Bellevue Commercial Refrigeration Repair (17.1 miles away, based in Bellevue, 4.7 stars from 150 reviews, lists Saturday hours); Ace Appliance Service (2.5 miles away, based in Everett, 5.0 stars from 322 reviews); HotWire Furnace, Air Conditioning & Appliance Repair Bothell (5.0 miles away, based in Bothell, 4.9 stars from 1,493 reviews, lists Saturday hours).

⚡ One call to reach a commercial laundry tech
☎(866) 293-4411

How Laundromat Washer Repairs Differ

Drains and sumpsCommercial washers dump water fast, often into a floor trough or sump. Slow drains, overflows and pump failures are common repair points.
Fill valves and water supplyLarge machines fill through bigger valves and hoses. Slow fills, cold-only fills or machines that keep filling point to valves, strainers or the building's water supply.
Coin and card systemsCoin drops, coin boxes and card readers start the machine. In route-operated laundry rooms the payment equipment often belongs to the operator, so the first call may be to them rather than a repair company.
Top-load coin machinesCommercial top-load washers are built for constant use and share many parts with heavy home machines: lid locks, drive parts, inlet valves and drain pumps.

Signs a Commercial Washer Needs Service

  • Loud banging or shaking on the spin
  • Door or lid stays locked after the cycle
  • Leaks under the machine or around the door
  • Machine stops mid-cycle with an error

Ask any company you call which commercial brands and machine types it services, such as top-load coin machines, front-load washers or washer-extractors.

Before Anyone Touches the Washer

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Washer Repair Cost Ranges for Reference

Published ranges for washer repairs, for reference when a Mill Creek company quotes commercial work:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Mill Creek

Most washer calls in Mill Creek come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work

In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.

Before You Book in Mill Creek

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • Is your company licensed where my state requires it, and insured?
  • If the washer is leaking, will you find where the water starts before quoting a part?

Commercial Washer Repair FAQs: Mill Creek, WA

Who repairs laundromat washers?
Some do and some do not. Companies that mention commercial, laundromat or multifamily laundry work are listed first. When you call, ask whether they work on your machine brand and type, such as top-load coin machines, front-load washers or washer-extractors.
How fast can a commercial washer be repaired?
It depends on the company and on parts. Ask each company how quickly it can come out and whether it stocks common parts for your machine brand.
How is a commercial front-load washer different?
Washer-extractors are heavy-duty front-load machines used in laundromats, hotels and gyms. Many are bolted to the floor and spin very fast, so bearings, drive parts and mounting matter more than on a home washer.

More Washing Machine Repair in Mill Creek, WA

Commercial Washer Repair in Nearby Cities

Before you call, note the brand, model and serial number from each machine's data plate, whether it is a top-load coin machine or a front-load washer-extractor, and any code on the display. A Mill Creek technician can then bring the right parts.

Tell us the machine and the problem and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech