Most Amana washer repairs in Burien involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Burien list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Washers Near Burien
Within 30 miles of Burien there are 40 appliance repair companies in our data. 2 list an address in Burien, and other nearby bases include Seattle (14), Renton (10), and Kent (7). The farthest listed company is about 8 miles out. Sub-Zero Service House is the nearest, roughly 1.1 miles from Burien. No company within 90 miles of Burien mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 31 rated companies in range average 4.7 stars.
Companies are shown by relevance and distance from Burien. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 1.1, 1.1, 1.2 |
|---|---|
| Companies within 30 miles | 60 |
| Name washers or washing machines in their listing | 8 |
| Open on Saturdays (per listing) | 32 |
| With 4.5+ stars and at least 10 reviews | 16 |
| Mention Amana | 0 |
Closest matches for Burien: Expert Appliance Repair (3.9 miles away, based in Seattle, 5.0 stars from 1,139 reviews); Appliance Pro Repairs (8.4 miles away, based in Seattle, 4.6 stars from 660 reviews, lists Saturday hours); Roman’s Appliance Repair Pro (3.3 miles away, based in Seattle, 4.9 stars from 117 reviews, lists Saturday hours); Appliance Fix Experts (5.1 miles away, based in Seattle, 4.8 stars from 48 reviews, lists Saturday hours).
Amana Washer Lines and Features
What Makes Amana Washer Repairs Different
Amana front loaders with a user-cleanable pump filter are serviced from the front: a short drain hose is emptied into a container, then the filter is unscrewed counterclockwise, and the location varies by model. Source: Amana - Cleaning the Pump Filter - Front Load Washer
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
What Amana Says to Check First
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| Sud / Sd | There are too many suds, and the washer adds rinsing to clear them. Source: Amana - Error Codes in Front Load Washers |
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
| LdU | Top load: the lid can't unlock because something is sitting on top of the washer. Source: Amana - Error Codes in Top Load HE Washers |
Signs Your Amana Washer Needs a Technician
- Water left in the drum after the cycle
- Water on the floor under or in front of the washer
- Loud banging, shaking or walking during the spin
Inside a Washer Repair Visit
Owner Care for Amana Washers
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
Budgeting for a Amana Washer Repair
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Burien Owners Should Know
Most washer calls in Burien come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
How to Choose a Washing Machine Technician Near Burien
- How often do you repair Amana washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
Amana Washer Repair FAQs: Burien, WA
How do I find a technician who knows Amana washers?
Why does my front-load washer smell?
Why won't my washer spin?
More Washing Machine Repair in Burien, WA
Amana Washer Repair Near Burien
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.