Most Amana washer repairs in Spanish Fork involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Spanish Fork list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Independent Amana Washer Technicians, Spanish Fork UT
40 repair companies serve Spanish Fork from within 30 miles. 4 of them are based in Spanish Fork itself, and other nearby bases include Orem (9), Provo (7), and American Fork (5). Distances run up to about 24 miles. Nearest on the list: Sears Appliance Repair, around 0.8 miles out. No company within 90 miles of Spanish Fork mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 29 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Spanish Fork. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Amana | 0 |
|---|---|
| Appliance repair companies in range (30 mi) | 54 |
| Name washers or washing machines in their listing | 4 |
| Three nearest companies, miles away | 0.8, 1.0, 2.3 |
| Open on Saturdays (per listing) | 38 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
Closest matches for Spanish Fork: Sears Appliance Repair (0.8 miles away, 4.3 stars from 52 reviews, lists Saturday hours); McCoy Fridge Repair (2.3 miles away, 4.9 stars from 209 reviews, lists Saturday hours); Brothers Masters (13.7 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Smart Appliance Service (4.8 miles away, based in Springville, 4.8 stars from 123 reviews).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Amana Washer
What a Amana Washer Technician Deals With
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Common Amana Washer Problems
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| Sud / Sd | There are too many suds, and the washer adds rinsing to clear them. Source: Amana - Error Codes in Front Load Washers |
| lid | Top load: the lid is open, and if it stays open for more than 10 minutes the cycle resets and drains. Source: Amana - Error Codes in Top Load HE Washers |
When to Call for Amana Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- Grinding or roaring noise that rises with spin speed
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Spanish Fork Washer Call
Care Amana Recommends for Its Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month to clear detergent and softener residue. Source: Amana - HE Detergent use in a Washer
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
Budgeting for a Amana Washer Repair
Price the repair before replacing a Amana washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Spanish Fork
Most washer calls in Spanish Fork come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Spanish Fork
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
- What is the service call or diagnostic fee, and is it applied to the repair?
Amana Washer Repair FAQs: Spanish Fork, UT
Is this Amana customer service?
How do I find a technician who knows Amana washers?
Why won't my washer spin?
Is my Amana washer worth repairing?
Other Washer Repair in Spanish Fork
Amana Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.