Most Amana washer repairs in Wells Branch involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Wells Branch list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Amana Washer Repair Near Wells Branch
We found 40 appliance repair companies within 30 miles of Wells Branch. Other nearby bases include Austin (21), Round Rock (13), and Pflugerville (6). The closest is Appliance Rescue Team, about 0.8 miles away. No company within 90 miles of Wells Branch mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 37 rated companies, the average public rating is 4.8 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 30 miles | 60 |
|---|---|
| Mention Amana | 0 |
| Three nearest companies, miles away | 0.8, 0.9, 1.1 |
| Open on Saturdays (per listing) | 43 |
| Rated 4.5 stars or higher (10+ reviews) | 27 |
| Name washers or washing machines in their listing | 13 |
Closest matches for Wells Branch: The Appliance Family (2.1 miles away, based in Austin, 4.8 stars from 198 reviews, lists Saturday hours); Munko Appliance Repair (5.5 miles away, based in Round Rock, 5.0 stars from 50 reviews, lists Saturday hours); ExpressFix Appliance Repair (4.6 miles away, based in Round Rock, 4.8 stars from 48 reviews, lists Saturday hours); PMA Home Experts (2.4 miles away, based in Round Rock, 5.0 stars from 27 reviews).
Amana Washer Lines and Features
What Makes Amana Washer Repairs Different
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
- Too many suds. Amana says to use only HE detergent in the amount the detergent maker recommends for the load. Source: Amana - HE Detergent use in a Washer
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| F9 E1 | Front load: draining is taking longer than expected, so check the drain hose and standpipe. Source: Amana - Error Codes in Front Load Washers |
| F5 E2 | Front load: the door isn't locking properly. Source: Amana - Error Codes in Front Load Washers |
| LF / Lo FL / F8 E1 | Washer is filling too slowly or getting low water flow; check that the faucets are fully open and the hoses are clear. Source: Amana - Error Codes in Top Load HE Washers |
When to Call for Amana Washer Repair
- Burning smell or a motor that hums without turning
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
What a Washing Machine Technician Checks
Keeping a Amana Washer Running
- Run the Clean Washer cycle with a washer cleaning tablet about once a month to clear detergent and softener residue. Source: Amana - HE Detergent use in a Washer
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
Budgeting for a Amana Washer Repair
Price the repair before replacing a Amana washer. Published ranges for common jobs:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- How old the washer is
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Wells Branch Owners Should Know
Most washer calls in Wells Branch come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Wells Branch
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Do you work on front-load and top-load washers, or only one type?
Amana Washer Repair FAQs: Wells Branch, TX
What should I do about a Amana error code?
Where is the water under my washer coming from?
Do you work for Amana?
How do I find a technician who knows Amana washers?
Related Repair Pages for Wells Branch
Amana Washer Repair Near Wells Branch
Write down any error code your Amana washer shows and at what point in the cycle it appears. It helps a Wells Branch technician bring the right parts.