Amana owners in Converse usually want two things from a repair company: experience with the brand and quick access to parts. The Converse list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Independent Amana Washer Technicians, Converse TX
Within 30 miles of Converse there are 40 appliance repair companies in our data. 6 list an address in Converse, and the rest are spread across San Antonio (18), Schertz (5), and Cibolo (5). The farthest listed company is about 12 miles out. Conway Appliance Repair Tech is the nearest, roughly 0.4 miles from Converse. None of the repair companies near Converse name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 34 rated companies in range average 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Open on Saturdays (per listing) | 42 |
| Mention Amana | 0 |
| Distance to the three closest (mi) | 0.4, 0.4, 0.6 |
| Mention washer work | 9 |
| With 4.5+ stars and at least 10 reviews | 19 |
Closest matches for Converse: Quick Tweak Appliance Repair (10.5 miles away, based in San Antonio, 5.0 stars from 264 reviews, lists Saturday hours); Mr. Appliance of San Antonio (6.7 miles away, based in San Antonio, 4.6 stars from 796 reviews, lists Saturday hours); Able Appliance Home Service (7.2 miles away, based in San Antonio, 4.6 stars from 30 reviews, lists Saturday hours); Sears Appliance Repair (11.6 miles away, based in San Antonio, 4.5 stars from 915 reviews, lists Saturday hours).
Amana Washer Lines and Features
What a Amana Washer Technician Deals With
Shipping bolts hold the drum during transport and must come out after installation, or the washer will vibrate and walk. Source: Amana - Washer is Vibrating, Walking or Moving
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Common Amana Washer Problems
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| OL | Top load: the load is too big, so the washer drains and some items need to come out. Source: Amana - Error Codes in Top Load HE Washers |
Signs Your Amana Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
Inside a Washer Repair Visit
Care Amana Recommends for Its Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Amana Washer Repair Cost Ranges
Price the repair before replacing a Amana washer. Published ranges for common jobs:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Converse, TX
Most washer calls in Converse come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Converse
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
Amana Washer Repair FAQs: Converse, TX
Do you work for Amana?
Which Converse technicians work on Amana?
Why does my Amana washer show an error code?
Why does my front-load washer smell?
More Washing Machine Repair in Converse, TX
Amana Washer Repair Near Converse
Amana Washer Repair for Towns Near Converse
Live outside Converse? The same Amana washer repair technicians serve Kirby. See each town's own washing machine repair listings below.
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.