Serving Watertown, South Dakota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Amana Washer Repair in Watertown, SD

Independent repair companies near Watertown that work on Amana washers, with companies that mention Amana listed first.

Amana washer acting up in Watertown?
Tell us the model and the problem and we will connect you with a local technician.
☎(866) 293-4411
✓5 companies listed for Watertown✓Independent, not a manufacturer✓Public ratings & distances

A Amana washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Watertown list starts with companies that name Amana, followed by other appliance repair companies that work on washers.

Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.

Independent Amana Washer Technicians, Watertown SD

5 repair companies serve Watertown from within 60 miles. 3 of them are based in Watertown itself, and the rest are spread across Estelline (1) and Brookings (1). No company within 90 miles of Watertown mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Mr. Appliance is the nearest, roughly 2.1 miles from Watertown. Across 5 rated companies, the average public rating is 4.9 stars. Watertown is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Mr. Appliance
101 9th Ave SW, Watertown, SD 57201
2.1 mi from Watertown
★★★★★ 4.9 (129 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1101 Jenson Ave S, Watertown, SD 57201
3.0 mi from Watertown
★★★★★ 4.8 (17 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Brookings
2626 Sweetgrass Dr, Brookings, SD 57006
47.4 mi from Watertown
★★★★★ 4.9 (196 reviews)
Mentions washersSaturday hours
Appliance Repair
Kuiper Appliance Service LLC
1316 4th Ave SE, Watertown, SD 57201
3.1 mi from Watertown
★★★★★ 4.8 (47 reviews)
Appliance Repair
Neighborhood Appliance Repair
603 Davis Ave E, Estelline, SD 57234
26.1 mi from Watertown
★★★★★ 5.0 (1 review)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Washer repair near Watertown at a glance
Rated 4.5 stars or higher (10+ reviews)4
Mention Amana0
Open on Saturdays (per listing)4
Mention washer work3
Companies within 60 miles5
Distance to the three closest (mi)2.1, 3.0, 3.1

First up for Watertown: Mr. Appliance (2.1 miles away, 4.9 stars from 129 reviews, lists Saturday hours); Sears Appliance Repair (3.0 miles away, 4.8 stars from 17 reviews, lists Saturday hours); Mr. Appliance of Brookings (47.4 miles away, based in Brookings, 4.9 stars from 196 reviews, lists Saturday hours); Kuiper Appliance Service LLC (3.1 miles away, 4.8 stars from 47 reviews).

⚡ Call to reach an independent Amana washer tech
☎(866) 293-4411

Know which Amana washer you have before you call. Amana makes top-load agitator models, and the technician will ask.

Amana Washer Lines and Features

Top-load washer with Dual Action AgitatorBelt-drive Amana top loader whose agitator pushes clothes down through the bottom of the basket for faster cleaning.
Late Lid LockLeaves the lid unlocked longer so forgotten items can be added before the spin starts.

What a Amana Washer Technician Deals With

Amana front loaders with a user-cleanable pump filter are serviced from the front: a short drain hose is emptied into a container, then the filter is unscrewed counterclockwise, and the location varies by model. Source: Amana - Cleaning the Pump Filter - Front Load Washer

What Amana Says to Check First

Reading a Amana Washer Error Code

CodeWhat it means
F5 E2Front load: the door isn't locking properly. Source: Amana - Error Codes in Front Load Washers
rL / F34Front load: items were left in the drum during the Clean Washer cycle. Source: Amana - Error Codes in Front Load Washers
HCTop load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers

Amana Washer Problems Worth a Service Call

  • Grinding or roaring noise that rises with spin speed
  • Loud banging, shaking or walking during the spin
  • Burning smell or a motor that hums without turning

Inside a Washer Repair Visit

Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.

Keeping a Amana Washer Running

Budgeting for a Amana Washer Repair

Price the repair before replacing a Amana washer. Published ranges for common jobs:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Before the Technician Arrives

  • Any error code shown on the display
  • Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
  • How old the washer is

Local Notes for Watertown

Most washer calls in Watertown come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

The South Dakota Plumbing Commission issues Appliance Contractor and Appliance Installer licenses as plumbing specialty licenses; official pages reviewed did not spell out which appliance work they cover or whether repair alone requires one. Source: South Dakota Plumbing Commission - Licensing

In South Dakota, you can check a license with the South Dakota Plumbing Commission lists of licensees (specialty licensees, including appliance) or report a problem to the South Dakota Attorney General, Division of Consumer Protection.

Before You Book in Watertown

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Do you work on front-load and top-load washers, or only one type?
  • Is your company licensed where my state requires it, and insured?

Amana Washer Repair FAQs: Watertown, SD

Is my Amana washer worth repairing?
Compare the repair quote with the price of a comparable new washer and consider its age. Lid switches, door locks, inlet valves, belts and drain pumps are modest repairs on a washer that is otherwise sound. Our repair-cost guide shows published ranges.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.

Other Washer Repair in Watertown

More Amana Washer Repair Pages Nearby

Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.

One call to a Amana washer technician near you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech