Most Amana washer repairs in Corning involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Corning list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana washers and other brands.
Who Works on Amana Washers Near Corning
We found 28 appliance repair companies within 60 miles of Corning. The rest are spread across Elmira (3), Horseheads (2), and Bath (2). None of the repair companies near Corning name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Sears Appliance Repair is the nearest, roughly 9.4 miles from Corning. Rated companies nearby average 4.4 stars across 26 businesses. Because the nearest shops are farther out, ask each company whether Corning is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Amana | 0 |
|---|---|
| Three nearest companies, miles away | 9.4, 12.0, 13.2 |
| Rated 4.5 stars or higher (10+ reviews) | 12 |
| Listing Saturday hours | 19 |
| Repair companies inside 60 miles | 28 |
| Name washers or washing machines in their listing | 9 |
Closest matches for Corning: Sears Appliance Repair (12.0 miles away, based in Horseheads, 4.5 stars from 161 reviews, lists Saturday hours); Sears Appliance Repair (9.4 miles away, based in Horseheads, 4.5 stars from 67 reviews, lists Saturday hours); Sears Appliance Repair (19.0 miles away, based in Bath, 5.0 stars from 15 reviews, lists Saturday hours); Sears Appliance Repair (34.5 miles away, based in Hornell, 4.9 stars from 34 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines Technicians Work On
What a Amana Washer Technician Deals With
Shipping bolts hold the drum during transport and must come out after installation, or the washer will vibrate and walk. Source: Amana - Washer is Vibrating, Walking or Moving
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Common Amana Washer Problems
- Lid won't lock or unlock. Amana says to clear anything caught under the lid and any detergent buildup around the lock, and to take items such as a laundry basket off the top of the washer. Source: Amana - Error Codes in Top Load HE Washers
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Error Codes
| Code | What it means |
|---|---|
| LdL | Top load: the lid can't lock, often because of an item under the lid or detergent buildup at the lock. Source: Amana - Error Codes in Top Load HE Washers |
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
| F9 E1 | Front load: draining is taking longer than expected, so check the drain hose and standpipe. Source: Amana - Error Codes in Front Load Washers |
Signs Your Amana Washer Needs a Technician
- Water on the floor under or in front of the washer
- An error code on the display
- Water left in the drum after the cycle
What Gets Fixed on a Corning Washer Call
Keeping a Amana Washer Running
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
What Amana Washer Repairs Cost
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
Local Notes for Corning
Most washer calls in Corning come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
In New York, you can report a problem to the New York State Office of the Attorney General, Bureau of Consumer Frauds and Protection.
Before You Book in Corning
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Amana Washer Repair FAQs: Corning, NY
Is my Amana washer worth repairing?
Is this Amana customer service?
Why does my front-load washer smell?
Other Washer Repair in Corning
Amana Washer Repair Near Corning
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.