Most Amana washer repairs in Brentwood involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Brentwood list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Washers Near Brentwood
Our data shows 40 appliance repair companies inside a 30-mile radius of Brentwood. 6 of them are based in Brentwood itself, and other nearby bases include Hauppauge (6), Central Islip (3), and Islip (3). The farthest listed company is about 7 miles out. No company within 90 miles of Brentwood mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Appliance Fix Experts is the nearest, roughly 0.5 miles from Brentwood. Rated companies nearby average 4.7 stars across 22 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 0.5, 0.5, 1.2 |
|---|---|
| Mention Amana | 0 |
| Name washers or washing machines in their listing | 9 |
| With 4.5+ stars and at least 10 reviews | 15 |
| Listing Saturday hours | 44 |
| Companies within 30 miles | 60 |
Closest matches for Brentwood: Eddies Appliance Repair (1.6 miles away, 5.0 stars from 1,413 reviews, lists Saturday hours); Willie's Appliance (2.1 miles away, based in Hauppauge, 4.6 stars from 1,316 reviews, lists Saturday hours); Sears Appliance Repair (5.0 miles away, based in East Northport, 4.6 stars from 110 reviews, lists Saturday hours); Bestway Appliance Repair (2.1 miles away, based in Central Islip, 5.0 stars from 50 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines and Features
What Makes Amana Washer Repairs Different
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
Signs Your Amana Washer Needs a Technician
- Water on the floor under or in front of the washer
- An error code on the display
- Burning smell or a motor that hums without turning
What a Washing Machine Technician Checks
Keeping a Amana Washer Running
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
What Amana Washer Repairs Cost
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Brentwood Owners Should Know
Most washer calls in Brentwood come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
In New York, you can report a problem to the New York State Office of the Attorney General, Bureau of Consumer Frauds and Protection.
Questions to Ask a Brentwood Washer Technician
- How often do you repair Amana washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Can you give a written estimate before ordering parts?
Amana Washer Repair FAQs: Brentwood, NY
What should I do about a Amana error code?
What stops a washer from spinning?
Which Brentwood technicians work on Amana?
Why is my washer leaking?
Related Repair Pages for Brentwood
More Amana Washer Repair Pages Nearby
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.