Most Amana washer repairs in South Valley involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving South Valley, with those that mention Amana first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Independent Amana Washer Technicians, South Valley NM
Within 30 miles of South Valley there are 23 appliance repair companies in our data. The rest are spread across Albuquerque (14), Belen (3), and Edgewood (2). The farthest listed company is about 29 miles out. No company within 90 miles of South Valley mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Appliance Care & Repair, about 2.2 miles away. The 20 rated companies in range average 4.5 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 11 |
|---|---|
| Listing Saturday hours | 17 |
| Three nearest companies, miles away | 2.2, 3.4, 6.7 |
| Mention Amana | 0 |
| Name washers or washing machines in their listing | 8 |
| Repair companies inside 30 miles | 23 |
At the top of the South Valley list: Sarah's Appliance Repair LLC (7.8 miles away, based in Albuquerque, 4.9 stars from 566 reviews, lists Saturday hours); ASAP Appliance Repair (12.3 miles away, based in Albuquerque, 4.9 stars from 657 reviews, lists Saturday hours); Sears Appliance Repair (9.2 miles away, based in Albuquerque, 4.4 stars from 368 reviews, lists Saturday hours); Appliance Care & Repair (2.2 miles away, based in Albuquerque, 4.8 stars from 84 reviews).
Amana Washer Lines and Features
What a Amana Washer Technician Deals With
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
The Amana Dual Action Agitator top loader is belt-driven by a 1/4 HP motor. Source: Whirlpool Corporation - Amana 3.5 cu. ft. Top-Load Washer with Dual Action Agitator (NTW4516FW)
Common Amana Washer Problems
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Amana Washer Error Codes
| Code | What it means |
|---|---|
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| OL | Top load: the load is too big, so the washer drains and some items need to come out. Source: Amana - Error Codes in Top Load HE Washers |
Signs Your Amana Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Washer will not start or the lid or door stays locked
- Loud banging, shaking or walking during the spin
What a Washing Machine Technician Checks
Owner Care for Amana Washers
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
Budgeting for a Amana Washer Repair
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for South Valley, NM
Most washer calls in South Valley come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)
In New Mexico, you can check a license with the NM Regulation and Licensing Department, Construction Industries: Verify a License or report a problem to the New Mexico Department of Justice (Attorney General), Consumer Protection.
Questions to Ask a South Valley Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
- Do you work on front-load and top-load washers, or only one type?
Amana Washer Repair FAQs: South Valley, NM
Which South Valley technicians work on Amana?
Should I repair or replace my Amana washer?
Where is the water under my washer coming from?
Related Repair Pages for South Valley
More Amana Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.