Amana owners in Greenville usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Independent Amana Washer Technicians, Greenville NC
Our data shows 40 appliance repair companies inside a 60-mile radius of Greenville. 2 of them are based in Greenville itself, and the rest are spread across Goldsboro (5), Jacksonville (5), and Washington (4). Citywide Appliance Repair is the nearest, roughly 1.0 miles from Greenville. None of the repair companies near Greenville name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 34 rated companies in range average 4.3 stars. Greenville is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Greenville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 7 |
|---|---|
| Listing Saturday hours | 19 |
| Distance to the three closest (mi) | 1.0, 2.7, 5.9 |
| Appliance repair companies in range (60 mi) | 40 |
| Mention Amana | 0 |
| With 4.5+ stars and at least 10 reviews | 13 |
First up for Greenville: Sears Appliance Repair (2.7 miles away, 4.3 stars from 220 reviews, lists Saturday hours); JB Appliance Solutions (40.8 miles away, based in Nashville, 4.9 stars from 638 reviews); Cavalry Appliance Service (38.3 miles away, based in New Bern, 4.9 stars from 535 reviews); Sears Appliance Repair (35.5 miles away, based in Rocky Mount, 4.4 stars from 129 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines Technicians Work On
What a Amana Washer Technician Deals With
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Common Amana Washer Problems
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
- Too many suds. Amana says to use only HE detergent in the amount the detergent maker recommends for the load. Source: Amana - HE Detergent use in a Washer
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
| F5 E2 | Front load: the door isn't locking properly. Source: Amana - Error Codes in Front Load Washers |
| F7 E1 | Front load: motor speed sensing error, so check that the shipping bolts are out and the washer isn't overloaded. Source: Amana - Error Codes in Front Load Washers |
Signs Your Amana Washer Needs a Technician
- An error code on the display
- Water left in the drum after the cycle
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Owner Care for Amana Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
What Amana Washer Repairs Cost
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
What Greenville Owners Should Know
Most washer calls in Greenville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Greenville
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Amana washers, and how quickly can you get parts?
Amana Washer Repair FAQs: Greenville, NC
Is my Amana washer worth repairing?
Do you work for Amana?
Which Greenville technicians work on Amana?
Why is my washer leaking?
Related Repair Pages for Greenville
Amana Washer Repair Near Greenville
Also Serving Towns Around Greenville
The technicians listed for Greenville also cover smaller towns nearby, including Winterville and Ayden. If you are in one of them, the companies above are your closest Amana washer repair options, and our helpline covers you too.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.