If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana washers and other brands.
Who Works on Amana Washers Near Havre
Within 169 miles of Havre there are 6 appliance repair companies in our data. 1 list an address in Havre, and the rest are spread across Great Falls (3), Lewistown (1), and Helena (1). Sears Appliance Repair is the nearest, roughly 2.5 miles from Havre. None of the repair companies near Havre name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 5 rated companies in range average 4.5 stars. Because the nearest shops are farther out, ask each company whether Havre is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (169 mi) | 6 |
|---|---|
| Distance to the three closest (mi) | 2.5, 102.3, 102.8 |
| Mention washer work | 2 |
| Mention Amana | 0 |
| Listing Saturday hours | 4 |
| With 4.5+ stars and at least 10 reviews | 3 |
At the top of the Havre list: Sears Appliance Repair (2.5 miles away, lists Saturday hours); Appliance Doctor (103.2 miles away, based in Great Falls, 5.0 stars from 432 reviews); Sears Appliance Repair (103.9 miles away, based in Great Falls, 5.0 stars from 1 reviews, lists Saturday hours); Affordable Appliance Repair (102.8 miles away, based in Great Falls, 4.6 stars from 60 reviews, lists Saturday hours).
Know Your Amana Washer
How Amana Washers Are Built
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| lid | Top load: the lid is open, and if it stays open for more than 10 minutes the cycle resets and drains. Source: Amana - Error Codes in Top Load HE Washers |
| F9 E1 | Front load: draining is taking longer than expected, so check the drain hose and standpipe. Source: Amana - Error Codes in Front Load Washers |
| rL / F34 | Front load: items were left in the drum during the Clean Washer cycle. Source: Amana - Error Codes in Front Load Washers |
Amana Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Loud banging, shaking or walking during the spin
- Burning smell or a motor that hums without turning
What Gets Fixed on a Havre Washer Call
Care Amana Recommends for Its Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
Amana Washer Repair Cost Ranges
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Havre
Most washer calls in Havre come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Montana, you can check a license with the Montana DLI Construction Contractor Registration Lookup or report a problem to the Montana Department of Justice, Office of Consumer Protection.
Hiring a Washer Repair Company in Havre
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
Amana Washer Repair FAQs: Havre, MT
Is my Amana washer worth repairing?
Where is the water under my washer coming from?
Is this Amana customer service?
Why does my Amana washer show an error code?
More Washing Machine Repair in Havre, MT
Amana Washer Repair in Nearby Cities
Write down any error code your Amana washer shows and at what point in the cycle it appears. It helps a Havre technician bring the right parts.