A Amana washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana washers and other brands.
Independent Amana Washer Technicians, Palm City FL
Our data shows 40 appliance repair companies inside a 30-mile radius of Palm City. 1 list an address in Palm City, and other nearby bases include Port St. Lucie (10), Stuart (7), and Fort Pierce (7). The farthest listed company is about 29 miles out. The closest is Mr. Appliance of Stuart, about 0.8 miles away. No company within 90 miles of Palm City mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 30 rated companies in range average 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 0.8, 2.6, 2.7 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 23 |
| Mention Amana | 0 |
| Repair companies inside 30 miles | 45 |
| Name washers or washing machines in their listing | 15 |
| Listing Saturday hours | 27 |
First up for Palm City: Mr. Appliance of Stuart (0.8 miles away, 4.7 stars from 313 reviews); Appliance Care (8.2 miles away, based in Port St. Lucie, 4.9 stars from 561 reviews, lists Saturday hours); Port St Lucie Appliance Repair (10.4 miles away, based in Port St. Lucie, 4.7 stars from 357 reviews); Appliance Repair American (4.5 miles away, based in Stuart, 4.9 stars from 131 reviews, lists Saturday hours).
Amana Washer Lines Technicians Work On
What Makes Amana Washer Repairs Different
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
- Too many suds. Amana says to use only HE detergent in the amount the detergent maker recommends for the load. Source: Amana - HE Detergent use in a Washer
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| F9 E1 | Front load: draining is taking longer than expected, so check the drain hose and standpipe. Source: Amana - Error Codes in Front Load Washers |
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| Sud / Sd | There are too many suds, and the washer adds rinsing to clear them. Source: Amana - Error Codes in Front Load Washers |
Amana Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Loud banging, shaking or walking during the spin
- Grinding or roaring noise that rises with spin speed
Inside a Washer Repair Visit
Keeping a Amana Washer Running
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
Amana Washer Repair Cost Ranges
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Palm City
Most washer calls in Palm City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
How to Choose a Washing Machine Technician Near Palm City
- Can you give a written estimate before ordering parts?
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
Amana Washer Repair FAQs: Palm City, FL
Which Palm City technicians work on Amana?
What stops a washer from spinning?
Why does my front-load washer smell?
Related Repair Pages for Palm City
Amana Washer Repair Near Palm City
Amana Washer Repair for Towns Near Palm City
Amana washer repair for Indiantown is handled by the same companies listed for Palm City. Each town also has its own washing machine repair page with the nearest companies:
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.