If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Lone Tree list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Independent Amana Washer Technicians, Lone Tree CO
Within 30 miles of Lone Tree there are 40 appliance repair companies in our data. 2 list an address in Lone Tree, and other nearby bases include Parker (13), Highlands Ranch (5), and Centennial (5). The closest is Mr. Appliance of Littleton, about 0.5 miles away. None of the repair companies near Lone Tree name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 35 rated companies, the average public rating is 4.9 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Companies within 30 miles | 60 |
|---|---|
| Mention Amana | 0 |
| With 4.5+ stars and at least 10 reviews | 19 |
| Listing Saturday hours | 41 |
| Three nearest companies, miles away | 0.5, 0.6, 1.8 |
| Mention washer work | 13 |
First up for Lone Tree: Mr. Appliance of Littleton (0.5 miles away, based in Englewood, 4.9 stars from 741 reviews, lists Saturday hours); Mr. Appliance of Parker (5.3 miles away, based in Parker, 4.8 stars from 1,142 reviews); Denver Appliance Repair Service (7.0 miles away, based in Highlands Ranch, 4.8 stars from 465 reviews, lists Saturday hours); Commercial Appliance Repair Pro (2.8 miles away, based in Littleton, 4.6 stars from 82 reviews).
Amana Washer Lines Technicians Work On
How Amana Washers Are Built
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
What Amana Says to Check First
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
- Too many suds. Amana says to use only HE detergent in the amount the detergent maker recommends for the load. Source: Amana - HE Detergent use in a Washer
Amana Washer Error Codes
| Code | What it means |
|---|---|
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
Signs Your Amana Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- Loud banging, shaking or walking during the spin
- An error code on the display
What a Washing Machine Technician Checks
Care Amana Recommends for Its Washers
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
What Amana Washer Repairs Cost
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Lone Tree, CO
Most washer calls in Lone Tree come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
Before You Book in Lone Tree
- If the washer is leaking, will you find where the water starts before quoting a part?
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
Amana Washer Repair FAQs: Lone Tree, CO
How do I find a technician who knows Amana washers?
What should I do about a Amana error code?
What stops a washer from spinning?
Related Repair Pages for Lone Tree
Amana Washer Repair in Nearby Cities
Write down any error code your Amana washer shows and at what point in the cycle it appears. It helps a Lone Tree technician bring the right parts.