Amana owners in South Lake Tahoe usually want two things from a repair company: experience with the brand and quick access to parts. The South Lake Tahoe list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Independent Amana Washer Technicians, South Lake Tahoe CA
We found 40 appliance repair companies within 60 miles of South Lake Tahoe. 1 list an address in South Lake Tahoe, and other nearby bases include Reno (15), Sparks (5), and Gardnerville (4). Distances run up to about 59 miles. The closest is Sears Appliance Repair, about 2.4 miles away. None of the repair companies near South Lake Tahoe name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 32 rated companies in range average 4.5 stars. South Lake Tahoe is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from South Lake Tahoe. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Repair companies inside 60 miles | 48 |
|---|---|
| Listing Saturday hours | 28 |
| Three nearest companies, miles away | 2.4, 12.5, 13.7 |
| Mention washer work | 13 |
| Mention Amana | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 20 |
First up for South Lake Tahoe: Sears Appliance Repair (20.8 miles away, based in Carson City, 4.5 stars from 89 reviews, lists Saturday hours); Sears Appliance Repair (2.4 miles away, 4.5 stars from 60 reviews, lists Saturday hours); Mr. Appliance of Reno (41.3 miles away, based in Reno, 4.8 stars from 925 reviews, lists Saturday hours); Sears (38.5 miles away, based in Reno, 4.6 stars from 89 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines Technicians Work On
What a Amana Washer Technician Deals With
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Common Amana Washer Problems
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Error Codes
| Code | What it means |
|---|---|
| rL / F34 | Front load: items were left in the drum during the Clean Washer cycle. Source: Amana - Error Codes in Front Load Washers |
| Sud / Sd | There are too many suds, and the washer adds rinsing to clear them. Source: Amana - Error Codes in Front Load Washers |
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
Signs Your Amana Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- An error code on the display
- Water left in the drum after the cycle
What a Washing Machine Technician Checks
Care Amana Recommends for Its Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month to clear detergent and softener residue. Source: Amana - HE Detergent use in a Washer
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
Budgeting for a Amana Washer Repair
Price the repair before replacing a Amana washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- How old the washer is
Local Notes for South Lake Tahoe
Most washer calls in South Lake Tahoe come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).
Hiring a Washer Repair Company in South Lake Tahoe
- What guarantee do you give on parts and labor?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
Amana Washer Repair FAQs: South Lake Tahoe, CA
Why is my washer leaking?
How do I get rid of a washer mildew smell?
Why won't my washer spin?
Why does my Amana washer show an error code?
More Washing Machine Repair in South Lake Tahoe, CA
Amana Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.