Most GE washer repairs in Greendale involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Greendale list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Greendale WI
Our data shows 40 appliance repair companies inside a 30-mile radius of Greendale. 1 list an address in Greendale, and other nearby bases include Milwaukee (19), Wauwatosa (5), and Brookfield (3). The farthest listed company is about 18 miles out. No company within 90 miles of Greendale mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Sears Appliance Repair, around 1.0 miles out. Across 34 rated companies, the average public rating is 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Rated 4.5 stars or higher (10+ reviews) | 9 |
|---|---|
| Distance to the three closest (mi) | 1.0, 2.6, 4.4 |
| Listing Saturday hours | 31 |
| Appliance repair companies in range (30 mi) | 60 |
| Name washers or washing machines in their listing | 13 |
| Mention GE | 0 |
First up for Greendale: Mr. Appliance of Milwaukee (8.0 miles away, based in Muskego, 4.9 stars from 1,894 reviews); Sears Appliance Repair (7.0 miles away, based in Cudahy, 4.5 stars from 119 reviews, lists Saturday hours); Sears Appliance Repair (1.0 miles away, 4.4 stars from 110 reviews, lists Saturday hours); Sears Appliance Repair (5.6 miles away, based in West Allis, 4.3 stars from 215 reviews, lists Saturday hours).
Know Your GE Washer
What Makes GE Washer Repairs Different
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Care GE Recommends for Its Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
Around Greendale
Most washer calls in Greendale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
Before You Book in Greendale
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair GE washers, and how quickly can you get parts?
GE Washer Repair FAQs: Greendale, WI
Should I repair or replace my GE washer?
Which Greendale technicians work on GE?
What should I do about a GE error code?
Where is the water under my washer coming from?
More Washing Machine Repair in Greendale, WI
GE Washer Repair Near Greendale
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Greendale technician bring the right parts.