Most GE washer repairs in Lake Stevens involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Lake Stevens, with those that mention GE first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
Who Works on GE Washers Near Lake Stevens
We found 40 appliance repair companies within 30 miles of Lake Stevens. 4 of them are based in Lake Stevens itself, and the rest are spread across Everett (15), Lynnwood (7), and Marysville (2). None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Local Appliance Repairs is the nearest, roughly 1.7 miles from Lake Stevens. The 34 rated companies in range average 4.7 stars.
Companies are shown by relevance and distance from Lake Stevens. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 1.7, 1.9, 2.0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 30 |
| Name washers or washing machines in their listing | 13 |
| Companies within 30 miles | 60 |
| Mention GE | 0 |
| Open on Saturdays (per listing) | 46 |
Closest matches for Lake Stevens: GE Monogram Repair Kirkland (21.4 miles away, based in Kirkland, 5.0 stars from 21 reviews, lists Saturday hours); Smartfix Appliance (1.9 miles away, 5.0 stars from 102 reviews, lists Saturday hours); Appliance Mechanics (2.0 miles away, 4.9 stars from 445 reviews); Ace Appliance Service (11.2 miles away, based in Everett, 5.0 stars from 322 reviews).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines Technicians Work On
What Makes GE Washer Repairs Different
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
What GE Says to Check First
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
GE Washer Error Codes
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Musty or mildew smell from the drum or door seal
- Water on the floor under or in front of the washer
What Gets Fixed on a Lake Stevens Washer Call
Care GE Recommends for Its Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
Around Lake Stevens
Most washer calls in Lake Stevens come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Questions to Ask a Lake Stevens Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
GE Washer Repair FAQs: Lake Stevens, WA
What stops a washer from spinning?
Why is my washer leaking?
How do I get rid of a washer mildew smell?
What should I do about a GE error code?
More Washing Machine Repair in Lake Stevens, WA
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.