If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Zapata list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
GE Washer Repair Near Zapata
We found 8 appliance repair companies within 60 miles of Zapata. The rest are spread across Laredo (8). The farthest listed company is about 47 miles out. No company within 90 miles of Zapata mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Polar Tech, around 39.1 miles out. The 8 rated companies in range average 4.6 stars. Zapata is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 3 |
| Mention washer work | 1 |
| Distance to the three closest (mi) | 39.1, 43.2, 43.5 |
| Listing Saturday hours | 7 |
| Companies within 60 miles | 8 |
At the top of the Zapata list: Sears Appliance Repair (47.3 miles away, based in Laredo, 4.6 stars from 115 reviews, lists Saturday hours); Estevis Appliance (46.3 miles away, based in Laredo, 4.6 stars from 27 reviews); Polar Tech (39.1 miles away, based in Laredo, 4.5 stars from 56 reviews, lists Saturday hours); Appliance Repair Laredo TX (44.2 miles away, based in Laredo, 5.0 stars from 2 reviews, lists Saturday hours).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
Know Your GE Washer
What a GE Washer Technician Deals With
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
Common GE Washer Problems
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
GE Washer Error Codes
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
GE Washer Problems Worth a Service Call
- An error code on the display
- Washer will not start or the lid or door stays locked
- Loud banging, shaking or walking during the spin
How a Washer Service Call Usually Goes in Zapata
Keeping a GE Washer Running
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
Local Notes for Zapata
Most washer calls in Zapata come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Before You Book in Zapata
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Can you give a written estimate before ordering parts?
GE Washer Repair FAQs: Zapata, TX
How do I get rid of a washer mildew smell?
Should I repair or replace my GE washer?
Why is my washer leaking?
Is this GE customer service?
Other Washer Repair in Zapata
More GE Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.