If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Santa Fe, with those that mention GE first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Independent GE Washer Technicians, Santa Fe TX
Within 30 miles of Santa Fe there are 40 appliance repair companies in our data. 1 list an address in Santa Fe, and the rest are spread across Pasadena (11), League City (6), and Friendswood (3). Of those, 1 mentions GE by name. Nearest on the list: A Better Deal Appliance Source, around 2.7 miles out. Rated companies nearby average 4.4 stars across 39 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 23 |
|---|---|
| Listing Saturday hours | 45 |
| Mention washer work | 21 |
| Three nearest companies, miles away | 2.7, 5.5, 5.5 |
| Mention GE | 1 |
| Companies within 30 miles | 60 |
At the top of the Santa Fe list: Mr. Appliance of League City (12.4 miles away, based in Friendswood, 4.8 stars from 765 reviews, lists Saturday hours); Appliance Force (10.9 miles away, based in League City, 4.9 stars from 75 reviews); Mr. Appliance of Deer Park (19.6 miles away, based in Pasadena, 4.8 stars from 190 reviews, lists Saturday hours); Sears Appliance Repair (5.5 miles away, based in League City, 4.5 stars from 280 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines Technicians Work On
What a GE Washer Technician Deals With
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
GE Washer Error Codes
| Code | What it means |
|---|---|
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Loud banging, shaking or walking during the spin
- Grinding or roaring noise that rises with spin speed
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Care GE Recommends for Its Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Santa Fe Owners Should Know
Most washer calls in Santa Fe come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Santa Fe
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Washer Repair FAQs: Santa Fe, TX
Why does my front-load washer smell?
What should I do about a GE error code?
Is my GE washer worth repairing?
Other Washer Repair in Santa Fe
More GE Washer Repair Pages Nearby
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.