If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Monahans, with those that mention GE first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Independent GE Washer Technicians, Monahans TX
We found 7 appliance repair companies within 60 miles of Monahans. The rest are spread across Odessa (3), Fort Stockton (2), and Midland (2). Distances run up to about 60 miles. ASAP Laundry Equipment is the nearest, roughly 37.8 miles from Monahans. None of the repair companies near Monahans name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 7 rated companies, the average public rating is 3.7 stars. Monahans is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention GE | 0 |
|---|---|
| Three nearest companies, miles away | 37.8, 41.8, 45.0 |
| Listing Saturday hours | 7 |
| Rated 4.5 stars or higher (10+ reviews) | 0 |
| Appliance repair companies in range (60 mi) | 7 |
| Mention washer work | 5 |
Closest matches for Monahans: Dc Appliance and Rv Repair- Pecos Tx, Monahans Tx, Fortstockton Tx (47.8 miles away, based in Fort Stockton, 4.4 stars from 38 reviews, lists Saturday hours); Sears Appliance Repair (45.0 miles away, based in Odessa, 3.5 stars from 43 reviews, lists Saturday hours); ASAP Laundry Equipment (37.8 miles away, based in Odessa, 3.5 stars from 2 reviews, lists Saturday hours); Sears Appliance Repair (51.5 miles away, based in Fort Stockton, 3.9 stars from 7 reviews, lists Saturday hours).
GE Washer Lines Technicians Work On
What Makes GE Washer Repairs Different
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
GE Washer Error Codes
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
Signs Your GE Washer Needs a Technician
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
- An error code on the display
What a Washing Machine Technician Checks
Keeping a GE Washer Running
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
Local Notes for Monahans
Most washer calls in Monahans come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Monahans Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair GE washers, and how quickly can you get parts?
GE Washer Repair FAQs: Monahans, TX
Why does my GE washer show an error code?
Why does my front-load washer smell?
Do you work for GE?
Related Repair Pages for Monahans
More GE Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.