A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Lumberton list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Lumberton
14 repair companies serve Lumberton from within 30 miles. The rest are spread across Beaumont (7), Groves (2), and Vidor (1). The farthest listed company is about 28 miles out. None of the repair companies near Lumberton name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Sears Appliance Repair is the nearest, roughly 9.3 miles from Lumberton. Across 12 rated companies, the average public rating is 4.1 stars.
Companies are shown by relevance and distance from Lumberton. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 14 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 5 |
| Distance to the three closest (mi) | 9.3, 12.5, 12.7 |
| Name washers or washing machines in their listing | 4 |
| Mention GE | 0 |
| Open on Saturdays (per listing) | 10 |
The leading options for Lumberton are Mr. Appliance of Beaumont (14.0 miles away, based in Beaumont, 4.9 stars from 343 reviews, lists Saturday hours); A1 Star Appliance Repair (12.7 miles away, based in Beaumont, 4.8 stars from 154 reviews, lists Saturday hours); Sears Appliance Repair (9.3 miles away, based in Beaumont, 4.7 stars from 258 reviews, lists Saturday hours); Sears Appliance Repair (25.0 miles away, based in Port Arthur, 4.7 stars from 167 reviews, lists Saturday hours).
Know Your GE Washer
What Makes GE Washer Repairs Different
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
GE Washer Error Codes
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
Signs Your GE Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Washer will not start or the lid or door stays locked
- Washer will not spin, or clothes come out soaking wet
Inside a Washer Repair Visit
Owner Care for GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Lumberton
Most washer calls in Lumberton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Lumberton Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
GE Washer Repair FAQs: Lumberton, TX
Which Lumberton technicians work on GE?
Is this GE customer service?
What stops a washer from spinning?
Related Repair Pages for Lumberton
GE Washer Repair in Nearby Cities
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Lumberton technician bring the right parts.