GE owners in Krum usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Krum, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Krum
Our data shows 40 appliance repair companies inside a 30-mile radius of Krum. Other nearby bases include Denton (11), Lewisville (5), and Little Elm (4). The farthest listed company is about 22 miles out. None of the repair companies near Krum name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. J&J Appliance Service is the nearest, roughly 5.5 miles from Krum. Rated companies nearby average 4.4 stars across 36 businesses.
Companies are shown by relevance and distance from Krum. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention GE | 0 |
|---|---|
| Companies within 30 miles | 60 |
| Three nearest companies, miles away | 5.5, 5.6, 5.9 |
| Mention washer work | 26 |
| With 4.5+ stars and at least 10 reviews | 24 |
| Listing Saturday hours | 40 |
At the top of the Krum list: Got Your 6 Appliance Repair LLC (6.4 miles away, based in Denton, 5.0 stars from 367 reviews); Got your 6 appliance repair (7.2 miles away, based in Ponder, 5.0 stars from 513 reviews); AGB Appliance Repair (10.2 miles away, based in Denton, 4.8 stars from 636 reviews, lists Saturday hours); J&J Appliance Service (5.5 miles away, based in Denton, 5.0 stars from 495 reviews).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines Technicians Work On
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Common GE Washer Problems
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Krum Washer Call
Care GE Recommends for Its Washers
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
Local Notes for Krum
Most washer calls in Krum come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Krum Washer Technician
- How often do you repair GE washers, and how quickly can you get parts?
- What guarantee do you give on parts and labor?
- Will you check the drain pump filter and drain hose before replacing the pump?
GE Washer Repair FAQs: Krum, TX
Why does my GE washer show an error code?
Why does my front-load washer smell?
What stops a washer from spinning?
Should I repair or replace my GE washer?
Related Repair Pages for Krum
GE Washer Repair Near Krum
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.