Most GE washer repairs in Mount Carmel involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Mount Carmel list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
Independent GE Washer Technicians, Mount Carmel TN
Within 30 miles of Mount Carmel there are 19 appliance repair companies in our data. The rest are spread across Johnson City (4), Kingsport (3), and Bristol (3). The farthest listed company is about 30 miles out. The closest is Milhorn Appliance, about 5.9 miles away. Of those, 1 mentions GE by name. Across 19 rated companies, the average public rating is 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 7 |
|---|---|
| Mention washer work | 5 |
| Appliance repair companies in range (30 mi) | 19 |
| Rated 4.5 stars or higher (10+ reviews) | 7 |
| Distance to the three closest (mi) | 5.9, 8.0, 8.3 |
| Mention GE | 1 |
First up for Mount Carmel: Sears Appliance Repair (8.3 miles away, based in Kingsport, 4.5 stars from 174 reviews, lists Saturday hours); Mr. Appliance of the Tri-Cities (14.5 miles away, based in Gray, 4.5 stars from 1,004 reviews); Sears Appliance Repair (27.8 miles away, based in Greeneville, 4.5 stars from 119 reviews, lists Saturday hours); Sears Appliance Repair (22.1 miles away, based in Johnson City, 4.4 stars from 277 reviews, lists Saturday hours).
GE Washer Lines Technicians Work On
What Makes GE Washer Repairs Different
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
When to Call for GE Washer Repair
- Grinding or roaring noise that rises with spin speed
- Water left in the drum after the cycle
- An error code on the display
What Gets Fixed on a Mount Carmel Washer Call
Owner Care for GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Mount Carmel, TN
Most washer calls in Mount Carmel come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
Questions to Ask a Mount Carmel Washer Technician
- What is the service call or diagnostic fee, and is it applied to the repair?
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
GE Washer Repair FAQs: Mount Carmel, TN
Is this GE customer service?
What should I do about a GE error code?
What stops a washer from spinning?
Why does my front-load washer smell?
Related Repair Pages for Mount Carmel
More GE Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.