If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Maryville list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Maryville
Within 30 miles of Maryville there are 36 appliance repair companies in our data. 3 of them are based in Maryville itself, and other nearby bases include Knoxville (20), Lenoir City (3), and Sevierville (3). The farthest listed company is about 26 miles out. No company within 90 miles of Maryville mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Pipe Wrench Plumbing, Heating & Cooling is the nearest, roughly 0.8 miles from Maryville. The 34 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Maryville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 11 |
|---|---|
| Companies within 30 miles | 36 |
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Listing Saturday hours | 18 |
| Three nearest companies, miles away | 0.8, 0.9, 1.0 |
| Mention GE | 0 |
The leading options for Maryville are Mr. Appliance of Knoxville (13.3 miles away, based in Knoxville, 4.6 stars from 1,973 reviews); S&S Service LLC (16.1 miles away, based in Lenoir City, 4.9 stars from 95 reviews, lists Saturday hours); Sears Appliance Repair (1.0 miles away, 4.4 stars from 106 reviews, lists Saturday hours); ProTech Appliance Repair, Inc. (17.6 miles away, based in Knoxville, 4.9 stars from 270 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
Common GE Washer Problems
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Error Codes
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
When to Call for GE Washer Repair
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
How a Washer Service Call Usually Goes in Maryville
Owner Care for GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- How old the washer is
Laundry Notes for Maryville, TN
Most washer calls in Maryville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
Hiring a Washer Repair Company in Maryville
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
- Do you work on front-load and top-load washers, or only one type?
GE Washer Repair FAQs: Maryville, TN
Which Maryville technicians work on GE?
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
Is my GE washer worth repairing?
Other Washer Repair in Maryville
GE Washer Repair Near Maryville
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Maryville technician bring the right parts.