A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Jim Thorpe, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Washer Repair Near Jim Thorpe
We found 32 appliance repair companies within 30 miles of Jim Thorpe. The rest are spread across Allentown (6), Bethlehem (3), and Stroudsburg (3). The farthest listed company is about 30 miles out. None of the repair companies near Jim Thorpe name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Sears Appliance Repair, about 10.9 miles away. The 30 rated companies in range average 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 10 |
|---|---|
| Appliance repair companies in range (30 mi) | 32 |
| Distance to the three closest (mi) | 10.9, 16.2, 19.0 |
| Listing Saturday hours | 20 |
| Mention GE | 0 |
| With 4.5+ stars and at least 10 reviews | 18 |
Closest matches for Jim Thorpe: Sears Appliance Repair (21.2 miles away, based in Whitehall Township, 4.6 stars from 250 reviews, lists Saturday hours); Sears Appliance Repair (27.9 miles away, based in Kingston, 4.7 stars from 164 reviews, lists Saturday hours); Sears Appliance Repair (16.2 miles away, based in Hazle Township, 4.6 stars from 126 reviews, lists Saturday hours); Sears Appliance Repair (28.4 miles away, based in Stroudsburg, 4.7 stars from 230 reviews, lists Saturday hours).
GE Washer Lines Technicians Work On
How GE Washers Are Built
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
GE Washer Symptoms and First Checks
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Error Codes
| Code | What it means |
|---|---|
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
What a Washing Machine Technician Checks
Owner Care for GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Jim Thorpe
Most washer calls in Jim Thorpe come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Pennsylvania has no statewide license for appliance repair or for most construction trades; contractors doing home improvement work must register with the Attorney General, and some municipalities license trades such as plumbing. Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
In Pennsylvania, you can check a license with the PA Office of Attorney General Home Improvement Contractor Registration Search or report a problem to the Pennsylvania Office of Attorney General.
Questions to Ask a Jim Thorpe Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
GE Washer Repair FAQs: Jim Thorpe, PA
Why does my GE washer show an error code?
Why is my washer leaking?
Should I repair or replace my GE washer?
Related Repair Pages for Jim Thorpe
GE Washer Repair Near Jim Thorpe
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.