A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Lexington list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Lexington
Our data shows 7 appliance repair companies inside a 60-mile radius of Lexington. 1 of them are based in Lexington itself, and other nearby bases include Kearney (4) and North Platte (2). No company within 90 miles of Lexington mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Martin Electric Co., around 0.5 miles out. Rated companies nearby average 4.3 stars across 7 businesses. Lexington is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 60 miles | 7 |
|---|---|
| Distance to the three closest (mi) | 0.5, 30.3, 34.7 |
| Mention GE | 0 |
| Mention washer work | 3 |
| Rated 4.5 stars or higher (10+ reviews) | 4 |
| Open on Saturdays (per listing) | 3 |
First up for Lexington: Mr. Appliance of North Platte (58.7 miles away, based in North Platte, 4.9 stars from 379 reviews); Sears Appliance Repair (34.7 miles away, based in Kearney, 4.7 stars from 27 reviews, lists Saturday hours); Martin Electric Co. (0.5 miles away, 4.5 stars from 11 reviews, lists Saturday hours); Aunt Jo's Maytag-Home Appliance Center (35.4 miles away, based in Kearney, 4.8 stars from 60 reviews).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines Technicians Work On
What a GE Washer Technician Deals With
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
When to Call for GE Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- An error code on the display
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Lexington
Care GE Recommends for Its Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- Any error code shown on the display
Local Notes for Lexington
Most washer calls in Lexington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Nebraska does not license appliance repair technicians at the state level; contractors working on other people's property register with the Department of Labor, and trade licenses such as plumbing are handled by cities and villages. Source: Nebraska Department of Labor: Who Needs to Register
In Nebraska, you can check a license with the Nebraska Department of Labor contractor registration (Search Registered Contractors and Subcontractors) or report a problem to the Nebraska Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Lexington
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
GE Washer Repair FAQs: Lexington, NE
Why is my washer leaking?
Why won't my washer spin?
Which Lexington technicians work on GE?
More Washing Machine Repair in Lexington, NE
More GE Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.