GE owners in Sunset Hills usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Sunset Hills, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Sunset Hills
Within 30 miles of Sunset Hills there are 40 appliance repair companies in our data. The rest are spread across St. Louis (24), Affton (2), and Ellisville (2). The farthest listed company is about 15 miles out. Appliance-Mend.com LLC is the nearest, roughly 2.7 miles from Sunset Hills. None of the repair companies near Sunset Hills name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 27 rated companies, the average public rating is 4.3 stars.
Companies are shown by relevance and distance from Sunset Hills. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention GE | 0 |
|---|---|
| Mention washer work | 11 |
| Companies within 30 miles | 60 |
| Three nearest companies, miles away | 2.7, 4.4, 4.7 |
| Listing Saturday hours | 43 |
| With 4.5+ stars and at least 10 reviews | 18 |
First up for Sunset Hills: All American Appliance and HVAC Services (10.5 miles away, based in St. Louis, 4.7 stars from 2,771 reviews, lists Saturday hours); Mr. Appliance of Greater St. Louis (6.3 miles away, based in Ballwin, 4.8 stars from 1,345 reviews, lists Saturday hours); Hoffmann Brothers (7.4 miles away, based in Brentwood, 4.9 stars from 11,938 reviews, lists Saturday hours); Sears Appliance Repair (4.7 miles away, based in St. Louis, 4.3 stars from 196 reviews, lists Saturday hours).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
Know Your GE Washer
What a GE Washer Technician Deals With
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
- An error code on the display
How a Washer Service Call Usually Goes in Sunset Hills
Keeping a GE Washer Running
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Sunset Hills, MO
Most washer calls in Sunset Hills come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Questions to Ask a Sunset Hills Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on front-load and top-load washers, or only one type?
GE Washer Repair FAQs: Sunset Hills, MO
Do you work for GE?
Is my GE washer worth repairing?
How do I get rid of a washer mildew smell?
Why is my washer leaking?
Other Washer Repair in Sunset Hills
More GE Washer Repair Pages Nearby
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.