A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Carver list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
Independent GE Washer Technicians, Carver MN
We found 40 appliance repair companies within 30 miles of Carver. 1 list an address in Carver, and the rest are spread across Eden Prairie (5), Hopkins (5), and Burnsville (4). The farthest listed company is about 21 miles out. The closest is Appliance Help Services Carver, about 0.3 miles away. No company within 90 miles of Carver mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 24 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Carver. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Listing Saturday hours | 46 |
| With 4.5+ stars and at least 10 reviews | 18 |
| Three nearest companies, miles away | 0.3, 7.1, 8.1 |
| Mention washer work | 8 |
| Mention GE | 0 |
Closest matches for Carver: Appliance Repair Pro (14.4 miles away, based in Savage, 5.0 stars from 500 reviews, lists Saturday hours); AMA Appliance Service (15.0 miles away, based in Hopkins, 5.0 stars from 82 reviews); Sears Appliance Repair (11.9 miles away, based in Eden Prairie, 4.5 stars from 124 reviews, lists Saturday hours); Twin Cities Appliance Service Center Inc (14.9 miles away, based in Hopkins, 4.9 stars from 1,837 reviews).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines and Features
What a GE Washer Technician Deals With
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
Signs Your GE Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Carver Washer Call
Owner Care for GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Carver, MN
Most washer calls in Carver come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Before You Book in Carver
- Can you give a written estimate before ordering parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
GE Washer Repair FAQs: Carver, MN
Is this GE customer service?
What stops a washer from spinning?
Which Carver technicians work on GE?
Is my GE washer worth repairing?
More Washing Machine Repair in Carver, MN
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.