If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Anoka list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Who Works on GE Washers Near Anoka
Our data shows 40 appliance repair companies inside a 30-mile radius of Anoka. 2 list an address in Anoka, and other nearby bases include Minneapolis (7), Blaine (5), and Plymouth (4). Nearest on the list: Maple Appliance Repair Anoka, around 0.9 miles out. No company within 90 miles of Anoka mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 19 rated companies in range average 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Companies within 30 miles | 60 |
|---|---|
| Distance to the three closest (mi) | 0.9, 0.9, 2.2 |
| Rated 4.5 stars or higher (10+ reviews) | 19 |
| Mention GE | 0 |
| Listing Saturday hours | 46 |
| Mention washer work | 8 |
Closest matches for Anoka: Omega Force Appliance Repair (8.2 miles away, based in Rogers, 4.9 stars from 1,637 reviews, lists Saturday hours); Appliance Solutions (8.6 miles away, based in Ham Lake, 4.4 stars from 440 reviews, lists Saturday hours); Omega Force Appliance Repair (9.1 miles away, based in Fridley, 4.7 stars from 105 reviews, lists Saturday hours); Appliance Repair Inc. (0.9 miles away, 3.9 stars from 199 reviews).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
What Makes GE Washer Repairs Different
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Common GE Washer Problems
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
When to Call for GE Washer Repair
- Water on the floor under or in front of the washer
- Washer will not spin, or clothes come out soaking wet
- Grinding or roaring noise that rises with spin speed
What a Washing Machine Technician Checks
Care GE Recommends for Its Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Anoka
Most washer calls in Anoka come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Hiring a Washer Repair Company in Anoka
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Washer Repair FAQs: Anoka, MN
What should I do about a GE error code?
Should I repair or replace my GE washer?
Why does my front-load washer smell?
Why won't my washer spin?
More Washing Machine Repair in Anoka, MN
More GE Washer Repair Pages Nearby
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Anoka technician bring the right parts.