Most GE washer repairs in Brewer involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
GE Washer Repair Near Brewer
We found 10 appliance repair companies within 60 miles of Brewer. Other nearby bases include Bangor (2), Veazie (1), and Holden (1). Distances run up to about 60 miles. No company within 90 miles of Brewer mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Sears Appliance Repair is the nearest, roughly 3.3 miles from Brewer. Rated companies nearby average 4.5 stars across 10 businesses. Brewer is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Brewer. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 2 |
|---|---|
| Open on Saturdays (per listing) | 3 |
| Distance to the three closest (mi) | 3.3, 3.6, 3.6 |
| Appliance repair companies in range (60 mi) | 10 |
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 5 |
First up for Brewer: Sears Appliance Repair (3.3 miles away, based in Bangor, 4.3 stars from 12 reviews, lists Saturday hours); Tom's Appliance Service (3.6 miles away, based in Bangor, 4.7 stars from 26 reviews); Patriot Appliance Repair (4.8 miles away, based in Holden, 4.9 stars from 163 reviews); Penobscot Appliance Repair (3.6 miles away, based in Veazie, 3.7 stars from 6 reviews).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
What a GE Washer Technician Deals With
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
Common GE Washer Problems
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Error Codes
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
Signs Your GE Washer Needs a Technician
- Washer will not spin, or clothes come out soaking wet
- Washer fills slowly, will not fill, or keeps filling
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Care GE Recommends for Its Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Brewer
Most washer calls in Brewer come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maine has no general appliance repair license, but installing or servicing propane and natural gas appliances requires a Maine Fuel Board propane and natural gas technician license with an appliance connection and service authorization. Source: Maine Fuel Board - Licensing - Individual Licenses (Maine Office of Professional and Occupational Regulation)
In Maine, you can check a license with the Maine Professional and Financial Regulation Licensee Search or report a problem to the Maine Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Brewer
- Is your company licensed where my state requires it, and insured?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Brewer, ME
Do you work for GE?
Where is the water under my washer coming from?
Which Brewer technicians work on GE?
Other Washer Repair in Brewer
GE Washer Repair Near Brewer
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Brewer technician bring the right parts.