A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The North Laurel list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
Who Works on GE Washers Near North Laurel
We found 40 appliance repair companies within 30 miles of North Laurel. The rest are spread across Silver Spring (8), Laurel (6), and Columbia (6). Distances run up to about 12 miles. Nearest on the list: Laurel Appliance Repair Tech, around 1.7 miles out. No company within 30 miles of North Laurel names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Across 36 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from North Laurel. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 7 |
|---|---|
| Open on Saturdays (per listing) | 44 |
| With 4.5+ stars and at least 10 reviews | 18 |
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 1.7, 2.0, 2.6 |
| Mention GE | 0 |
The leading options for North Laurel are District-Columbia Hotpoint Rpr (19.0 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Mr. Appliance of Howard County (10.3 miles away, based in Ellicott City, 4.7 stars from 1,049 reviews, lists Saturday hours); Dexterous Appliance Repair (4.7 miles away, based in Fulton, 4.9 stars from 319 reviews); Power Tech Appliance Service (2.6 miles away, based in Laurel, 4.1 stars from 42 reviews, lists Saturday hours).
Know Your GE Washer
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
GE Washer Error Codes
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
Signs Your GE Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Care GE Recommends for Its Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for North Laurel, MD
Most washer calls in North Laurel come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Questions to Ask a North Laurel Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
GE Washer Repair FAQs: North Laurel, MD
Where is the water under my washer coming from?
Why does my GE washer show an error code?
Which North Laurel technicians work on GE?
Should I repair or replace my GE washer?
Related Repair Pages for North Laurel
GE Washer Repair Near North Laurel
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a North Laurel technician bring the right parts.