GE owners in Calverton usually want two things from a repair company: experience with the brand and quick access to parts. The Calverton list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Calverton
Within 30 miles of Calverton there are 40 appliance repair companies in our data. The rest are spread across Silver Spring (12), Laurel (6), and Beltsville (3). The farthest listed company is about 7 miles out. No company within 30 miles of Calverton names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Asarco Refrigerations and Appliances is the nearest, roughly 1.1 miles from Calverton. Across 34 rated companies, the average public rating is 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 7 |
|---|---|
| Companies within 30 miles | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 11 |
| Mention GE | 0 |
| Distance to the three closest (mi) | 1.1, 1.2, 1.4 |
| Listing Saturday hours | 42 |
At the top of the Calverton list: District-Columbia Hotpoint Rpr (12.0 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Sears Appliance Repair (6.5 miles away, based in Hyattsville, 4.4 stars from 398 reviews, lists Saturday hours); Dexterous Appliance Repair (6.9 miles away, based in Fulton, 4.9 stars from 319 reviews); Sears Appliance Repair (2.4 miles away, based in Silver Spring, 4.0 stars from 1,337 reviews, lists Saturday hours).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines Technicians Work On
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
GE Washer Symptoms and First Checks
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Error Codes
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
Signs Your GE Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
How a Washer Service Call Usually Goes in Calverton
Owner Care for GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Around Calverton
Most washer calls in Calverton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Calverton
- Will you check the drain pump filter and drain hose before replacing the pump?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Calverton, MD
Why won't my washer spin?
What should I do about a GE error code?
How do I find a technician who knows GE washers?
Other Washer Repair in Calverton
More GE Washer Repair Pages Nearby
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.