GE owners in Lebanon usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Lebanon, with those that mention GE first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Independent GE Washer Technicians, Lebanon KY
We found 40 appliance repair companies within 60 miles of Lebanon. 1 of them are based in Lebanon itself, and other nearby bases include Louisville (9), Danville (5), and Frankfort (4). The farthest listed company is about 50 miles out. The closest is Nugent’s Appliance Repair, about 5.3 miles away. 1 lists GE specifically. The 38 rated companies in range average 4.3 stars. Because the nearest shops are farther out, ask each company whether Lebanon is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 5.3, 23.0, 24.6 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 23 |
| Name washers or washing machines in their listing | 24 |
| Mention GE | 1 |
| Listing Saturday hours | 37 |
| Appliance repair companies in range (60 mi) | 60 |
The leading options for Lebanon are General Electric Co (56.9 miles away, based in Jeffersonville, 4.0 stars from 38 reviews); Nugent’s Appliance Repair (5.3 miles away, 5.0 stars from 228 reviews, lists Saturday hours); Tinks Heavenly Touch Appliance Services (47.2 miles away, based in Jeffersontown, 4.9 stars from 127 reviews, lists Saturday hours); Sears Appliance Repair (26.8 miles away, based in Danville, 4.3 stars from 81 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
What a GE Washer Technician Deals With
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
GE Washer Error Codes
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- Musty or mildew smell from the drum or door seal
- Water on the floor under or in front of the washer
- Loud banging, shaking or walking during the spin
Inside a Washer Repair Visit
Keeping a GE Washer Running
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Lebanon, KY
Most washer calls in Lebanon come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Kentucky has no license category for appliance repair as such; the Department of Housing, Buildings and Construction licenses trades such as HVAC (whose scope covers installing and repairing heating, burner and cooling systems), plumbing and electrical. Source: KRS 198B.650 Definitions (Kentucky Legislative Research Commission)
In Kentucky, you can check a license with the Department of Housing, Buildings and Construction License Search and Verification or report a problem to the Kentucky Attorney General, Office of Consumer Protection.
Before You Book in Lebanon
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Lebanon, KY
Is this GE customer service?
Should I repair or replace my GE washer?
How do I find a technician who knows GE washers?
Why does my front-load washer smell?
More Washing Machine Repair in Lebanon, KY
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.