Most GE washer repairs in Shiloh involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Shiloh list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
GE Washer Repair Near Shiloh
We found 40 appliance repair companies within 30 miles of Shiloh. Other nearby bases include St. Louis (15), Belleville (4), and Fairview Heights (3). The farthest listed company is about 22 miles out. Appliance Repair Ruby is the nearest, roughly 2.4 miles from Shiloh. None of the repair companies near Shiloh name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 30 rated companies, the average public rating is 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Open on Saturdays (per listing) | 40 |
| Three nearest companies, miles away | 2.4, 3.8, 3.9 |
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Name washers or washing machines in their listing | 11 |
| Appliance repair companies in range (30 mi) | 60 |
At the top of the Shiloh list: Mr. Appliance of Mid America (4.2 miles away, based in Fairview Heights, 4.8 stars from 1,246 reviews, lists Saturday hours); Hoffmann Brothers (17.2 miles away, based in Edwardsville, 4.9 stars from 5,567 reviews, lists Saturday hours); Mark's Appliance (16.8 miles away, based in Edwardsville, 4.9 stars from 1,610 reviews, lists Saturday hours); Reconditioned Appliances North (15.0 miles away, based in Pontoon Beach, 4.0 stars from 193 reviews, lists Saturday hours).
Know Your GE Washer
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
GE Washer Symptoms and First Checks
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- Water on the floor under or in front of the washer
- Washer fills slowly, will not fill, or keeps filling
- Loud banging, shaking or walking during the spin
How a Washer Service Call Usually Goes in Shiloh
Keeping a GE Washer Running
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Shiloh
Most washer calls in Shiloh come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Hiring a Washer Repair Company in Shiloh
- Will you check the drain pump filter and drain hose before replacing the pump?
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair GE washers, and how quickly can you get parts?
GE Washer Repair FAQs: Shiloh, IL
Where is the water under my washer coming from?
Which Shiloh technicians work on GE?
Is my GE washer worth repairing?
Why does my GE washer show an error code?
More Washing Machine Repair in Shiloh, IL
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.