GE owners in Pleasant Hill usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
GE Washer Repair Near Pleasant Hill
We found 27 appliance repair companies within 30 miles of Pleasant Hill. 1 of them are based in Pleasant Hill itself, and other nearby bases include Des Moines (11), Urbandale (5), and Ankeny (2). The farthest listed company is about 24 miles out. The closest is Pembroke Appliance Repair Solutions, about 1.9 miles away. No company within 90 miles of Pleasant Hill mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.5 stars across 25 businesses.
Companies are shown by relevance and distance from Pleasant Hill. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| With 4.5+ stars and at least 10 reviews | 5 |
|---|---|
| Mention washer work | 5 |
| Mention GE | 0 |
| Three nearest companies, miles away | 1.9, 4.1, 5.0 |
| Appliance repair companies in range (30 mi) | 27 |
| Open on Saturdays (per listing) | 21 |
The leading options for Pleasant Hill are Westside Appliance Repair (13.5 miles away, based in Urbandale, 4.6 stars from 774 reviews); Sears Appliance Repair (11.8 miles away, based in Urbandale, 4.0 stars from 52 reviews, lists Saturday hours); Sears Appliance Repair (4.1 miles away, based in Des Moines, 4.4 stars from 117 reviews, lists Saturday hours); Greens Appliance, Heating & Cooling (15.3 miles away, based in Grimes, 4.9 stars from 4,448 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Symptoms and First Checks
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Error Codes
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
When to Call for GE Washer Repair
- Loud banging, shaking or walking during the spin
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
How a Washer Service Call Usually Goes in Pleasant Hill
Owner Care for GE Washers
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
What Pleasant Hill Owners Should Know
Most washer calls in Pleasant Hill come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.
Questions to Ask a Pleasant Hill Washer Technician
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
GE Washer Repair FAQs: Pleasant Hill, IA
Which Pleasant Hill technicians work on GE?
Why does my front-load washer smell?
Where is the water under my washer coming from?
More Washing Machine Repair in Pleasant Hill, IA
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.