A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
Independent GE Washer Technicians, San Carlos Park FL
40 repair companies serve San Carlos Park from within 30 miles. The rest are spread across Fort Myers (24), Bonita Springs (13), and Estero (2). None of the repair companies near San Carlos Park name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Morgan & Ellis Appliance Repair is the nearest, roughly 1.0 miles from San Carlos Park. Rated companies nearby average 4.6 stars across 13 businesses.
Companies are shown by relevance and distance from San Carlos Park. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 12 |
|---|---|
| Listing Saturday hours | 52 |
| Mention GE | 0 |
| Mention washer work | 7 |
| Companies within 30 miles | 60 |
| Three nearest companies, miles away | 1.0, 1.3, 1.9 |
First up for San Carlos Park: Mr. Appliance of Lee County (4.2 miles away, based in Fort Myers, 4.8 stars from 1,235 reviews, lists Saturday hours); Diamond Appliance Repair, LLC (2.3 miles away, based in Estero, 4.5 stars from 421 reviews, lists Saturday hours); Sears Appliance Repair (8.1 miles away, based in Fort Myers, 4.5 stars from 111 reviews, lists Saturday hours); Home-Tech (5.3 miles away, based in Fort Myers, 4.7 stars from 984 reviews, lists Saturday hours).
Know Your GE Washer
What a GE Washer Technician Deals With
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Error Codes
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
GE Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- An error code on the display
- Loud banging, shaking or walking during the spin
What Gets Fixed on a San Carlos Park Washer Call
Keeping a GE Washer Running
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for San Carlos Park, FL
Most washer calls in San Carlos Park come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
Before You Book in San Carlos Park
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
- If the washer is leaking, will you find where the water starts before quoting a part?
GE Washer Repair FAQs: San Carlos Park, FL
Do you work for GE?
How do I get rid of a washer mildew smell?
Why does my GE washer show an error code?
Related Repair Pages for San Carlos Park
More GE Washer Repair Pages Nearby
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.