If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Oak Ridge list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Oak Ridge
Within 30 miles of Oak Ridge there are 40 appliance repair companies in our data. The rest are spread across Orlando (37), Windermere (1), and Azalea Park (1). Distances run up to about 9 miles. Tran Appliance Repair (25% OFF ALL SERVICES) is the nearest, roughly 0.4 miles from Oak Ridge. No company within 90 miles of Oak Ridge mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 34 rated companies in range average 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 38 |
|---|---|
| Mention GE | 0 |
| Three nearest companies, miles away | 0.4, 1.1, 2.1 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Mention washer work | 17 |
| Repair companies inside 30 miles | 60 |
At the top of the Oak Ridge list: Hartman's Appliance Repair (7.8 miles away, based in Orlando, 4.8 stars from 982 reviews, lists Saturday hours); Pronto Appliance Services (7.6 miles away, based in Orlando, 4.8 stars from 416 reviews, lists Saturday hours); JL Appliance Repair (9.1 miles away, based in Orlando, 5.0 stars from 147 reviews, lists Saturday hours); Reliable Appliance Repair (4.0 miles away, based in Orlando, 4.6 stars from 382 reviews, lists Saturday hours).
GE Washer Lines and Features
What a GE Washer Technician Deals With
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Common GE Washer Problems
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
How a Washer Service Call Usually Goes in Oak Ridge
Owner Care for GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Oak Ridge
Most washer calls in Oak Ridge come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
Questions to Ask a Oak Ridge Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
GE Washer Repair FAQs: Oak Ridge, FL
Why won't my washer spin?
Why does my GE washer show an error code?
Where is the water under my washer coming from?
More Washing Machine Repair in Oak Ridge, FL
More GE Washer Repair Pages Nearby
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.