If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Peoria, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Peoria AZ
We found 40 appliance repair companies within 30 miles of Peoria. 11 of them are based in Peoria itself, and the rest are spread across Glendale (10), Surprise (6), and Phoenix (4). Distances run up to about 16 miles. Nearest on the list: Allway Dacor Appliance Specialists, around 6.1 miles out. No company within 90 miles of Peoria mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 31 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 11 |
|---|---|
| Mention GE | 0 |
| With 4.5+ stars and at least 10 reviews | 19 |
| Listing Saturday hours | 36 |
| Repair companies inside 30 miles | 60 |
| Three nearest companies, miles away | 6.1, 9.3, 9.4 |
Closest matches for Peoria: Appliance Works (12.9 miles away, based in Sun City, 5.0 stars from 376 reviews); Mr. Appliance of Surprise and Goodyear (12.9 miles away, based in Sun City, 4.8 stars from 832 reviews, lists Saturday hours); SJ Appliance Repair LLC (13.2 miles away, based in El Mirage, 5.0 stars from 11 reviews, lists Saturday hours); Sonoran Sun Appliance Repair (12.9 miles away, based in Surprise, 4.9 stars from 17 reviews).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
What a GE Washer Technician Deals With
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
GE Washer Symptoms and First Checks
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- Musty or mildew smell from the drum or door seal
- Loud banging, shaking or walking during the spin
- Water on the floor under or in front of the washer
What a Washing Machine Technician Checks
Owner Care for GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Local Notes for Peoria
Most washer calls in Peoria come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
In Arizona, you can check a license with the Arizona Registrar of Contractors Contractor Search or report a problem to the Arizona Attorney General Consumer Protection.
Hiring a Washer Repair Company in Peoria
- Is your company licensed where my state requires it, and insured?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Peoria, AZ
Do you work for GE?
Where is the water under my washer coming from?
How do I get rid of a washer mildew smell?
How do I find a technician who knows GE washers?
Related Repair Pages for Peoria
GE Washer Repair in Nearby Cities
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.