A Frigidaire washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Pasco, with those that mention Frigidaire first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Frigidaire. Listed companies are independent technicians who repair Frigidaire washers and other brands.
Independent Frigidaire Washer Technicians, Pasco WA
Within 60 miles of Pasco there are 16 appliance repair companies in our data. 3 of them are based in Pasco itself, and the rest are spread across Kennewick (3), Walla Walla (3), and Richland (2). Distances run up to about 59 miles. None of the repair companies near Pasco name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. VSG Appliances is the nearest, roughly 1.0 miles from Pasco. Across 16 rated companies, the average public rating is 4.3 stars. Pasco is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Distance to the three closest (mi) | 1.0, 1.3, 2.3 |
|---|---|
| Repair companies inside 60 miles | 16 |
| Name washers or washing machines in their listing | 3 |
| Rated 4.5 stars or higher (10+ reviews) | 8 |
| Open on Saturdays (per listing) | 10 |
| Mention Frigidaire | 0 |
At the top of the Pasco list: Fred's Appliance (5.3 miles away, based in Kennewick, 4.1 stars from 731 reviews, lists Saturday hours); Master's Appliance & Refrigeration, LLC (2.3 miles away, 4.2 stars from 77 reviews); Smart Appliance Repair (7.6 miles away, based in Richland, 4.8 stars from 104 reviews, lists Saturday hours); UDG Services LLC (7.3 miles away, based in Richland, 4.9 stars from 142 reviews).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Frigidaire Washer Lines Technicians Work On
How Frigidaire Washers Are Built
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and the hose should not be sealed airtight into it. Source: Frigidaire - What should I do if my washer is draining slowly?
What Frigidaire Says to Check First
- Off balance / shaking. Level the washer, confirm the foam shipping support was removed, and redistribute any clothes bunched on one side. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
- Washer not spinning. Start with an unbalanced load: power off, wait for the lid to unlock, rearrange the clothes or add a few similar items, then restart. Source: Frigidaire - Top loading washer tub not spinning
What Frigidaire Washer Codes Mean
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
When to Call for Frigidaire Washer Repair
- Washer will not start or the lid or door stays locked
- An error code on the display
- Washer will not spin, or clothes come out soaking wet
What a Washing Machine Technician Checks
Keeping a Frigidaire Washer Running
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
- Use new fill hoses with rubber washers, replace flood-safe hoses with standard washer hoses, and run both faucets before connecting to flush debris away from the valve screens. Source: Frigidaire - Laundry Water Supply Guide
Budgeting for a Frigidaire Washer Repair
Most Frigidaire washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Pasco, WA
Most washer calls in Pasco come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Questions to Ask a Pasco Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Frigidaire Washer Repair FAQs: Pasco, WA
Is my Frigidaire washer worth repairing?
Why does my Frigidaire washer show an error code?
Why won't my washer spin?
Related Repair Pages for Pasco
More Frigidaire Washer Repair Pages Nearby
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.