A Frigidaire washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Trophy Club list starts with companies that name Frigidaire, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Independent Frigidaire Washer Technicians, Trophy Club TX
We found 40 appliance repair companies within 30 miles of Trophy Club. 1 list an address in Trophy Club, and other nearby bases include Fort Worth (5), Lewisville (5), and Southlake (4). Distances run up to about 12 miles. 1 lists Frigidaire specifically. Nearest on the list: Trophy Club Appliance Repair & Service, around 0.4 miles out. The 33 rated companies in range average 4.3 stars.
Companies are shown by relevance and distance from Trophy Club. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Open on Saturdays (per listing) | 42 |
|---|---|
| Three nearest companies, miles away | 0.4, 1.9, 4.2 |
| Repair companies inside 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 24 |
| Mention Frigidaire | 1 |
| Name washers or washing machines in their listing | 22 |
Closest matches for Trophy Club: Frigidaire Appliance Repair Service Fort Worth (9.0 miles away, based in Fort Worth, 4.5 stars from 31 reviews, lists Saturday hours); Ace Refrigeration and Appliance Repair (5.4 miles away, based in Keller, 4.9 stars from 1,857 reviews); Mr. Appliance of Hurst-Euless-Bedford (10.5 miles away, based in Bedford, 4.9 stars from 204 reviews, lists Saturday hours); AGB Appliance Repair (11.4 miles away, based in Denton, 4.8 stars from 636 reviews, lists Saturday hours).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Frigidaire Washer
What a Frigidaire Washer Technician Deals With
Top-load models lock the lid during spin as a safety feature, and the lock takes roughly one to three minutes to release after the washer is stopped. Source: Frigidaire - Top Load washer lid will not open
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors have filters that can clog. Source: Frigidaire - Laundry Water Supply Guide
Common Frigidaire Washer Problems
- Washer not spinning. Start with an unbalanced load: power off, wait for the lid to unlock, rearrange the clothes or add a few similar items, then restart. Source: Frigidaire - Top loading washer tub not spinning
- Washer not filling. Make sure both the hot and cold supply faucets are fully open. Source: Frigidaire - Top Load washer not filling with water properly
What Frigidaire Washer Codes Mean
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
When to Call for Frigidaire Washer Repair
- Water left in the drum after the cycle
- Washer will not start or the lid or door stays locked
- An error code on the display
What a Washing Machine Technician Checks
Care Frigidaire Recommends for Its Washers
- Use the recommended detergent amount and keep dispenser compartments below the max line, since excess detergent slows draining. Source: Frigidaire - What should I do if my washer is draining slowly?
- Use new fill hoses with rubber washers, replace flood-safe hoses with standard washer hoses, and run both faucets before connecting to flush debris away from the valve screens. Source: Frigidaire - Laundry Water Supply Guide
Frigidaire Washer Repair Cost Ranges
Most Frigidaire washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Trophy Club, TX
Most washer calls in Trophy Club come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Trophy Club
- What guarantee do you give on parts and labor?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
Frigidaire Washer Repair FAQs: Trophy Club, TX
What stops a washer from spinning?
What should I do about a Frigidaire error code?
Which Trophy Club technicians work on Frigidaire?
Why does my front-load washer smell?
More Washing Machine Repair in Trophy Club, TX
Frigidaire Washer Repair in Nearby Cities
Also Serving Towns Around Trophy Club
The technicians listed for Trophy Club also cover smaller towns nearby, including Roanoke. If you are in one of them, the companies above are your closest Frigidaire washer repair options, and our helpline covers you too.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Frigidaire repair.