A Frigidaire washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Sulphur Springs list starts with companies that name Frigidaire, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Frigidaire. Listed companies are independent technicians who repair Frigidaire washers and other brands.
Frigidaire Washer Repair Near Sulphur Springs
We found 40 appliance repair companies within 60 miles of Sulphur Springs. 2 list an address in Sulphur Springs, and the rest are spread across Rockwall (5), Wylie (3), and Forney (3). Distances run up to about 59 miles. None of the repair companies near Sulphur Springs name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Mayo Appliance Services, around 2.3 miles out. Rated companies nearby average 4.5 stars across 34 businesses. Because the nearest shops are farther out, ask each company whether Sulphur Springs is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 26 |
|---|---|
| Name washers or washing machines in their listing | 8 |
| Three nearest companies, miles away | 2.3, 3.3, 30.0 |
| Appliance repair companies in range (60 mi) | 49 |
| Mention Frigidaire | 0 |
| Open on Saturdays (per listing) | 26 |
First up for Sulphur Springs: Mayo Appliance Services (2.3 miles away, 5.0 stars from 579 reviews); Elite Appliance Solutions - Rockwall (52.6 miles away, based in Rockwall, 4.7 stars from 182 reviews); Appliance Fix Experts (51.2 miles away, based in Rockwall, 4.7 stars from 67 reviews, lists Saturday hours); Armstrong Appliance Service (32.4 miles away, based in Caddo Mills, 5.0 stars from 370 reviews).
Frigidaire Washer Lines and Features
What a Frigidaire Washer Technician Deals With
The washer tries to correct an unbalanced load on its own and shows E4 once it has failed three times. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and the hose should not be sealed airtight into it. Source: Frigidaire - What should I do if my washer is draining slowly?
Frigidaire Washer Symptoms and First Checks
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, and cut back on excess detergent. Source: Frigidaire - What should I do if my washer is draining slowly?
- Washer not spinning. Start with an unbalanced load: power off, wait for the lid to unlock, rearrange the clothes or add a few similar items, then restart. Source: Frigidaire - Top loading washer tub not spinning
Reading a Frigidaire Washer Error Code
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
Signs Your Frigidaire Washer Needs a Technician
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Care Frigidaire Recommends for Its Washers
- Empty pockets of coins and buckles and secure the drain hose with zip ties to stop rattling and knocking. Source: Frigidaire - Laundry Washers Noises Guide
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
What Frigidaire Washer Repairs Cost
A Frigidaire washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Sulphur Springs
Most washer calls in Sulphur Springs come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Sulphur Springs Washer Technician
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
- Is your company licensed where my state requires it, and insured?
Frigidaire Washer Repair FAQs: Sulphur Springs, TX
Do you work for Frigidaire?
What stops a washer from spinning?
Why is my washer leaking?
How do I find a technician who knows Frigidaire washers?
Related Repair Pages for Sulphur Springs
More Frigidaire Washer Repair Pages Nearby
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.