If your Frigidaire washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Plainview, with those that mention Frigidaire first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Independent Frigidaire Washer Technicians, Plainview TX
Our data shows 12 appliance repair companies inside a 60-mile radius of Plainview. 2 list an address in Plainview, and other nearby bases include Lubbock (9) and Muleshoe (1). The farthest listed company is about 57 miles out. No company within 90 miles of Plainview mentions Frigidaire by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Sears Appliance Repair is the nearest, roughly 0.5 miles from Plainview. Across 10 rated companies, the average public rating is 3.7 stars. Because the nearest shops are farther out, ask each company whether Plainview is inside its regular service area.
Companies are shown by relevance and distance from Plainview. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Open on Saturdays (per listing) | 6 |
|---|---|
| Mention washer work | 2 |
| Companies within 60 miles | 12 |
| With 4.5+ stars and at least 10 reviews | 4 |
| Mention Frigidaire | 0 |
| Three nearest companies, miles away | 0.5, 1.2, 33.9 |
The leading options for Plainview are Sears Appliance Repair (0.5 miles away, 4.6 stars from 72 reviews, lists Saturday hours); Sears Appliance Repair (46.5 miles away, based in Lubbock, 4.6 stars from 252 reviews, lists Saturday hours); Randys Appliance Repair (1.2 miles away, 4.2 stars from 5 reviews); J1Sev3n Services, LLC (56.5 miles away, based in Muleshoe, 5.0 stars from 29 reviews).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Frigidaire Washer Lines Technicians Work On
How Frigidaire Washers Are Built
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and the hose should not be sealed airtight into it. Source: Frigidaire - What should I do if my washer is draining slowly?
Frigidaire Washer Symptoms and First Checks
- Washer not filling. Make sure both the hot and cold supply faucets are fully open. Source: Frigidaire - Top Load washer not filling with water properly
- Washer not draining. Check whether the washer was moved or the drain hose bumped, then straighten any kink in the drain hose. Source: Frigidaire - Top loading washer is not draining
Frigidaire Washer Error Codes
| Code | What it means |
|---|---|
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
Frigidaire Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- An error code on the display
- Washer will not spin, or clothes come out soaking wet
What a Washing Machine Technician Checks
Keeping a Frigidaire Washer Running
- Use new fill hoses with rubber washers, replace flood-safe hoses with standard washer hoses, and run both faucets before connecting to flush debris away from the valve screens. Source: Frigidaire - Laundry Water Supply Guide
- Use the recommended detergent amount and keep dispenser compartments below the max line, since excess detergent slows draining. Source: Frigidaire - What should I do if my washer is draining slowly?
Frigidaire Washer Repair Cost Ranges
A Frigidaire washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Frigidaire Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
Laundry Notes for Plainview, TX
Most washer calls in Plainview come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Plainview
- If a part has to be ordered, how soon can you come back to finish?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Will you check the drain pump filter and drain hose before replacing the pump?
Frigidaire Washer Repair FAQs: Plainview, TX
Is this Frigidaire customer service?
What stops a washer from spinning?
Why is my washer leaking?
What should I do about a Frigidaire error code?
More Washing Machine Repair in Plainview, TX
More Frigidaire Washer Repair Pages Nearby
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.