If your Frigidaire washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Waynesville list starts with companies that name Frigidaire, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Frigidaire Washers Near Waynesville
We found 23 appliance repair companies within 30 miles of Waynesville. 3 of them are based in Waynesville itself, and the rest are spread across Asheville (9), Brevard (3), and Franklin (2). Distances run up to about 29 miles. None of the repair companies near Waynesville name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Century Appliance Service, about 0.6 miles away. Across 23 rated companies, the average public rating is 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Frigidaire | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 15 |
| Distance to the three closest (mi) | 0.6, 1.7, 2.8 |
| Name washers or washing machines in their listing | 4 |
| Appliance repair companies in range (30 mi) | 23 |
| Open on Saturdays (per listing) | 11 |
First up for Waynesville: Sears Appliance Repair (1.7 miles away, 4.6 stars from 182 reviews, lists Saturday hours); Mr. Appliance of Asheville (28.6 miles away, based in Fletcher, 4.8 stars from 1,708 reviews, lists Saturday hours); A-1 Appliance Service (2.8 miles away, 4.7 stars from 236 reviews); Sears Appliance Repair (27.4 miles away, based in Asheville, 4.5 stars from 193 reviews, lists Saturday hours).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Frigidaire Washer Lines and Features
What a Frigidaire Washer Technician Deals With
The washer tries to correct an unbalanced load on its own and shows E4 once it has failed three times. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
What Frigidaire Says to Check First
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, and cut back on excess detergent. Source: Frigidaire - What should I do if my washer is draining slowly?
- Lid won't unlock. Stop the washer and give the lid lock one to three minutes to release, since the lid stays locked during spin. Source: Frigidaire - Top Load washer lid will not open
Reading a Frigidaire Washer Error Code
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
Frigidaire Washer Problems Worth a Service Call
- An error code on the display
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Keeping a Frigidaire Washer Running
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
- Use the recommended detergent amount and keep dispenser compartments below the max line, since excess detergent slows draining. Source: Frigidaire - What should I do if my washer is draining slowly?
What Frigidaire Washer Repairs Cost
Most Frigidaire washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Waynesville
Most washer calls in Waynesville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Before You Book in Waynesville
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
Frigidaire Washer Repair FAQs: Waynesville, NC
Why does my Frigidaire washer show an error code?
Why does my front-load washer smell?
Is this Frigidaire customer service?
What stops a washer from spinning?
Related Repair Pages for Waynesville
More Frigidaire Washer Repair Pages Nearby
Frigidaire Washer Repair for Towns Near Waynesville
The technicians listed for Waynesville also cover smaller towns nearby, including Cullowhee and Franklin. If you are in one of them, the companies above are your closest Frigidaire washer repair options, and our helpline covers you too.
Write down any error code your Frigidaire washer shows and at what point in the cycle it appears. It helps a Waynesville technician bring the right parts.