Frigidaire owners in Beverly Hills usually want two things from a repair company: experience with the brand and quick access to parts. The Beverly Hills list starts with companies that name Frigidaire, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Independent Frigidaire Washer Technicians, Beverly Hills MI
Our data shows 40 appliance repair companies inside a 30-mile radius of Beverly Hills. The rest are spread across Detroit (6), Livonia (5), and Madison Heights (4). The farthest listed company is about 12 miles out. None of the repair companies near Beverly Hills name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Appliance Alliance Group, about 3.8 miles away. The 35 rated companies in range average 4.1 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 3.8, 4.0, 4.2 |
|---|---|
| Mention Frigidaire | 0 |
| Open on Saturdays (per listing) | 38 |
| With 4.5+ stars and at least 10 reviews | 21 |
| Repair companies inside 30 miles | 60 |
| Mention washer work | 11 |
At the top of the Beverly Hills list: Sears Appliance Repair (8.7 miles away, based in Warren, 4.6 stars from 448 reviews, lists Saturday hours); Mr. Appliance of Oakland County (11.6 miles away, based in Livonia, 4.8 stars from 1,216 reviews, lists Saturday hours); Sears Appliance Repair (8.0 miles away, based in Livonia, 4.6 stars from 258 reviews, lists Saturday hours); Conner's Repair (7.5 miles away, based in Madison Heights, 4.7 stars from 227 reviews, lists Saturday hours).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Frigidaire Washer Lines and Features
What Makes Frigidaire Washer Repairs Different
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors have filters that can clog. Source: Frigidaire - Laundry Water Supply Guide
Top-load models lock the lid during spin as a safety feature, and the lock takes roughly one to three minutes to release after the washer is stopped. Source: Frigidaire - Top Load washer lid will not open
Common Frigidaire Washer Problems
- Off balance / shaking. Level the washer, confirm the foam shipping support was removed, and redistribute any clothes bunched on one side. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
- Washer not filling. Make sure both the hot and cold supply faucets are fully open. Source: Frigidaire - Top Load washer not filling with water properly
Frigidaire Washer Error Codes
| Code | What it means |
|---|---|
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
Frigidaire Washer Problems Worth a Service Call
- Loud banging, shaking or walking during the spin
- Burning smell or a motor that hums without turning
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Owner Care for Frigidaire Washers
- Empty pockets of coins and buckles and secure the drain hose with zip ties to stop rattling and knocking. Source: Frigidaire - Laundry Washers Noises Guide
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
What Frigidaire Washer Repairs Cost
Most Frigidaire washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Frigidaire Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
Local Notes for Beverly Hills
Most washer calls in Beverly Hills come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
How to Choose a Washing Machine Technician Near Beverly Hills
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
- If the washer is leaking, will you find where the water starts before quoting a part?
Frigidaire Washer Repair FAQs: Beverly Hills, MI
Should I repair or replace my Frigidaire washer?
Where is the water under my washer coming from?
Do you work for Frigidaire?
Why does my front-load washer smell?
More Washing Machine Repair in Beverly Hills, MI
More Frigidaire Washer Repair Pages Nearby
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.