Electrolux owners in Brandermill usually want two things from a repair company: experience with the brand and quick access to parts. The Brandermill list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Brandermill
Our data shows 40 appliance repair companies inside a 30-mile radius of Brandermill. Other nearby bases include Richmond (25), Colonial Heights (3), and Midlothian (2). The farthest listed company is about 20 miles out. None of the repair companies near Brandermill name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Pro Line Appliance Installation, about 1.9 miles away. The 29 rated companies in range average 4.1 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 25 |
|---|---|
| Distance to the three closest (mi) | 1.9, 2.6, 5.6 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Mention Electrolux | 0 |
| Mention washer work | 7 |
| Companies within 30 miles | 51 |
At the top of the Brandermill list: Mr. Appliance of Richmond (16.5 miles away, based in Richmond, 4.8 stars from 1,293 reviews); Fusion HVAC & Appliance Repair (14.0 miles away, based in Richmond, 4.9 stars from 460 reviews, lists Saturday hours); Sears Appliance Repair (19.0 miles away, based in Colonial Heights, 4.4 stars from 318 reviews, lists Saturday hours); Mr. E Appliance Service (13.8 miles away, based in Richmond, 4.5 stars from 312 reviews, lists Saturday hours).
Electrolux Washer Lines and Features
How Electrolux Washers Are Built
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
What Electrolux Says to Check First
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
When to Call for Electrolux Washer Repair
- Washer will not start or the lid or door stays locked
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
What a Washing Machine Technician Checks
Care Electrolux Recommends for Its Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Washer Repairs Cost
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
Local Notes for Brandermill
Most washer calls in Brandermill come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Virginia's Board for Contractors has no appliance repair license classification, but its gas fitting contracting specialty covers installing, repairing or removing gas piping and appliances attached to real property. Source: 18VAC50-22-30, Definitions of specialty services
In Virginia, you can check a license with the DPOR License Lookup or report a problem to the Office of the Attorney General of Virginia, Consumer Protection Section.
Questions to Ask a Brandermill Washer Technician
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Electrolux washers, and how quickly can you get parts?
Electrolux Washer Repair FAQs: Brandermill, VA
Which Brandermill technicians work on Electrolux?
Should I repair or replace my Electrolux washer?
Why does my front-load washer smell?
Do you work for Electrolux?
More Washing Machine Repair in Brandermill, VA
Electrolux Washer Repair in Nearby Cities
Also Serving Towns Around Brandermill
Live outside Brandermill? The same Electrolux washer repair technicians serve Woodlake. See each town's own washing machine repair listings below.
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Brandermill technician bring the right parts.