Electrolux owners in Georgetown usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Georgetown, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Georgetown SC
40 repair companies serve Georgetown from within 60 miles. The rest are spread across Myrtle Beach (17), North Myrtle Beach (5), and Conway (4). The farthest listed company is about 52 miles out. No company within 90 miles of Georgetown mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Paradise Appliance, about 14.5 miles away. The 37 rated companies in range average 4.5 stars. Georgetown is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 15 |
|---|---|
| Distance to the three closest (mi) | 14.5, 20.9, 22.8 |
| Mention Electrolux | 0 |
| Companies within 60 miles | 60 |
| Open on Saturdays (per listing) | 33 |
| Rated 4.5 stars or higher (10+ reviews) | 32 |
The leading options for Georgetown are SC Appliance Repair (24.7 miles away, based in Myrtle Beach, 4.9 stars from 732 reviews, lists Saturday hours); Sears Appliance Repair (32.1 miles away, based in Myrtle Beach, 4.4 stars from 838 reviews, lists Saturday hours); Appliance Defiance (47.4 miles away, based in North Myrtle Beach, 4.9 stars from 143 reviews); Sears Appliance Repair (36.3 miles away, based in Conway, 4.5 stars from 173 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Electrolux Washer
How Electrolux Washers Are Built
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
What Electrolux Says to Check First
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
Signs Your Electrolux Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Washer will not start or the lid or door stays locked
- Water left in the drum after the cycle
What a Washing Machine Technician Checks
Care Electrolux Recommends for Its Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Washer Repairs Cost
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Local Notes for Georgetown
Most washer calls in Georgetown come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.
Questions to Ask a Georgetown Washer Technician
- How often do you repair Electrolux washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Georgetown, SC
What should I do about a Electrolux error code?
How do I get rid of a washer mildew smell?
Why is my washer leaking?
Is this Electrolux customer service?
Other Washer Repair in Georgetown
Electrolux Washer Repair in Nearby Cities
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Georgetown technician bring the right parts.