Electrolux owners in St. Marys usually want two things from a repair company: experience with the brand and quick access to parts. The St. Marys list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Electrolux Washer Repair Near St. Marys
We found 18 appliance repair companies within 60 miles of St. Marys. The rest are spread across DuBois (2), Bradford (2), and Warren (2). Distances run up to about 60 miles. No company within 90 miles of St. Marys mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Atlas Appliance Repair, LLC is the nearest, roughly 10.5 miles from St. Marys. The 18 rated companies in range average 4.6 stars. St. Marys is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (60 mi) | 18 |
|---|---|
| Mention Electrolux | 0 |
| Mention washer work | 6 |
| Three nearest companies, miles away | 10.5, 25.3, 26.2 |
| Listing Saturday hours | 9 |
| With 4.5+ stars and at least 10 reviews | 10 |
First up for St. Marys: Sears Appliance Repair (34.3 miles away, based in Bradford, 4.9 stars from 52 reviews, lists Saturday hours); Sears Appliance Repair (25.3 miles away, based in DuBois, 4.3 stars from 26 reviews, lists Saturday hours); Atlas Appliance Repair, LLC (10.5 miles away, based in Ridgway, 4.9 stars from 67 reviews); Mishler Appliance Services (34.9 miles away, based in Brookville, 4.5 stars from 29 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines and Features
What Makes Electrolux Washer Repairs Different
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Electrolux Washer Symptoms and First Checks
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
Electrolux Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
What a Washing Machine Technician Checks
Owner Care for Electrolux Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
What Electrolux Washer Repairs Cost
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for St. Marys
Most washer calls in St. Marys come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Pennsylvania has no statewide license for appliance repair or for most construction trades; contractors doing home improvement work must register with the Attorney General, and some municipalities license trades such as plumbing. Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
In Pennsylvania, you can check a license with the PA Office of Attorney General Home Improvement Contractor Registration Search or report a problem to the Pennsylvania Office of Attorney General.
How to Choose a Washing Machine Technician Near St. Marys
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: St. Marys, PA
How do I find a technician who knows Electrolux washers?
How do I get rid of a washer mildew smell?
Should I repair or replace my Electrolux washer?
More Washing Machine Repair in St. Marys, PA
More Electrolux Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.