If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Washington list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Electrolux Washer Repair Near Washington
We found 40 appliance repair companies within 30 miles of Washington. 1 list an address in Washington, and the rest are spread across Stroudsburg (4), Bethlehem (3), and Dover (3). Distances run up to about 26 miles. No company within 90 miles of Washington mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Appliance Master Washington is the nearest, roughly 0.2 miles from Washington. Rated companies nearby average 4.4 stars across 35 businesses.
Companies are shown by relevance and distance from Washington. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 17 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 20 |
| Companies within 30 miles | 53 |
| Mention Electrolux | 0 |
| Open on Saturdays (per listing) | 36 |
| Distance to the three closest (mi) | 0.2, 11.1, 11.4 |
Closest matches for Washington: Sears Appliance Repair (14.9 miles away, based in Easton, 4.7 stars from 431 reviews, lists Saturday hours); R&D Sieberg Appliances (25.5 miles away, based in Manville, 4.7 stars from 316 reviews); Appliance Master - Flemington, NJ (17.1 miles away, based in Flemington, 4.6 stars from 557 reviews, lists Saturday hours); Sears Appliance Repair (20.4 miles away, based in Stroudsburg, 4.7 stars from 230 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
What a Electrolux Washer Technician Deals With
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
Electrolux Washer Symptoms and First Checks
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
When to Call for Electrolux Washer Repair
- Water on the floor under or in front of the washer
- An error code on the display
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Keeping a Electrolux Washer Running
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Washington
Most washer calls in Washington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Jersey has no license specific to appliance repair; plumbing work is reserved to state-licensed master plumbers, and gas piping work on the customer side of the meter falls under HVACR contractor licensing, both overseen by boards in the Division of Consumer Affairs. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
In New Jersey, you can check a license with the New Jersey Division of Consumer Affairs License Verification System or report a problem to the New Jersey Division of Consumer Affairs.
How to Choose a Washing Machine Technician Near Washington
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
Electrolux Washer Repair FAQs: Washington, NJ
Should I repair or replace my Electrolux washer?
What should I do about a Electrolux error code?
Do you work for Electrolux?
How do I get rid of a washer mildew smell?
Other Washer Repair in Washington
More Electrolux Washer Repair Pages Nearby
Also Serving Towns Around Washington
The technicians listed for Washington also cover smaller towns nearby, including Hackettstown. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.