A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Electrolux Washers Near South St. Paul
40 repair companies serve South St. Paul from within 30 miles. Other nearby bases include St Paul (8), Minneapolis (5), and Bloomington (4). Distances run up to about 13 miles. Nearest on the list: Ollom Appliance, around 0.5 miles out. None of the repair companies near South St. Paul name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 26 rated companies, the average public rating is 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 21 |
|---|---|
| Companies within 30 miles | 60 |
| Listing Saturday hours | 46 |
| Three nearest companies, miles away | 0.5, 2.2, 2.3 |
| Mention washer work | 10 |
| Mention Electrolux | 0 |
First up for South St. Paul: Omega Force Appliance Repair (7.0 miles away, based in St Paul, 4.9 stars from 678 reviews, lists Saturday hours); Super Care Appliance Repair (2.2 miles away, based in West St Paul, 4.9 stars from 1,075 reviews, lists Saturday hours); Shortie's Appliances (10.4 miles away, based in Oakdale, 4.7 stars from 178 reviews, lists Saturday hours); SERVICE MATTERS Heating & Air & Appliance Repair LLC (12.3 miles away, based in Apple Valley, 4.9 stars from 141 reviews, lists Saturday hours).
Electrolux Washer Lines and Features
What a Electrolux Washer Technician Deals With
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Says to Check First
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
When to Call for Electrolux Washer Repair
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
- An error code on the display
What Gets Fixed on a South St. Paul Washer Call
Keeping a Electrolux Washer Running
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
What Electrolux Washer Repairs Cost
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Local Notes for South St. Paul
Most washer calls in South St. Paul come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Before You Book in South St. Paul
- If the washer is leaking, will you find where the water starts before quoting a part?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: South St. Paul, MN
Why is my washer leaking?
Why does my front-load washer smell?
Is my Electrolux washer worth repairing?
What stops a washer from spinning?
More Washing Machine Repair in South St. Paul, MN
Electrolux Washer Repair Near South St. Paul
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.