Electrolux owners in Blaine usually want two things from a repair company: experience with the brand and quick access to parts. The Blaine list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Blaine MN
We found 40 appliance repair companies within 30 miles of Blaine. 5 list an address in Blaine, and other nearby bases include Minneapolis (8), Ham Lake (3), and St Paul (3). Anderson's Mechanical Services LLC is the nearest, roughly 1.2 miles from Blaine. None of the repair companies near Blaine name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.4 stars across 21 businesses.
Companies are shown by relevance and distance from Blaine. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| With 4.5+ stars and at least 10 reviews | 21 |
|---|---|
| Mention washer work | 10 |
| Companies within 30 miles | 60 |
| Distance to the three closest (mi) | 1.2, 2.5, 2.5 |
| Mention Electrolux | 0 |
| Listing Saturday hours | 49 |
The leading options for Blaine are Sears Appliance Repair (14.5 miles away, based in Forest Lake, 4.6 stars from 201 reviews, lists Saturday hours); Appliance Solutions (6.9 miles away, based in Ham Lake, 4.4 stars from 440 reviews, lists Saturday hours); Anderson's Mechanical Services LLC (1.2 miles away, 4.8 stars from 1,207 reviews, lists Saturday hours); Omega Force Appliance Repair (4.8 miles away, based in Fridley, 4.7 stars from 105 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
What Makes Electrolux Washer Repairs Different
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
Electrolux Washer Symptoms and First Checks
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
Electrolux Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
- An error code on the display
Inside a Washer Repair Visit
Care Electrolux Recommends for Its Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
Electrolux Washer Repair Cost Ranges
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Blaine, MN
Most washer calls in Blaine come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Hiring a Washer Repair Company in Blaine
- What guarantee do you give on parts and labor?
- How often do you repair Electrolux washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
Electrolux Washer Repair FAQs: Blaine, MN
What stops a washer from spinning?
Is this Electrolux customer service?
Why is my washer leaking?
Why does my Electrolux washer show an error code?
More Washing Machine Repair in Blaine, MN
More Electrolux Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.