Most Electrolux washer repairs in Ferndale involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Ferndale, with those that mention Electrolux first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Who Works on Electrolux Washers Near Ferndale
We found 40 appliance repair companies within 30 miles of Ferndale. Other nearby bases include Baltimore (14), Columbia (5), and Glen Burnie (3). Distances run up to about 13 miles. No company within 90 miles of Ferndale mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Gracie Appliance Services, about 1.7 miles away. Across 36 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from Ferndale. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 1.7, 2.5, 3.6 |
|---|---|
| Open on Saturdays (per listing) | 39 |
| Mention washer work | 13 |
| Rated 4.5 stars or higher (10+ reviews) | 19 |
| Mention Electrolux | 0 |
| Companies within 30 miles | 60 |
Closest matches for Ferndale: Mr. Appliance of Howard County (11.5 miles away, based in Ellicott City, 4.7 stars from 1,049 reviews, lists Saturday hours); Sears Appliance Repair (3.6 miles away, based in Glen Burnie, 4.2 stars from 908 reviews, lists Saturday hours); Dr Appliance Repair - Pasadena (4.5 miles away, based in Pasadena, 5.0 stars from 18 reviews, lists Saturday hours); ABW Appliances - Corporate Headquarters (9.1 miles away, based in Jessup, 4.8 stars from 1,539 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
What a Electrolux Washer Technician Deals With
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
What Electrolux Says to Check First
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
Signs Your Electrolux Washer Needs a Technician
- Water on the floor under or in front of the washer
- Water left in the drum after the cycle
- An error code on the display
Inside a Washer Repair Visit
Keeping a Electrolux Washer Running
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Ferndale
Most washer calls in Ferndale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Ferndale
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: Ferndale, MD
Do you work for Electrolux?
Why does my front-load washer smell?
Why won't my washer spin?
Related Repair Pages for Ferndale
Electrolux Washer Repair Near Ferndale
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.